0-13 Readout: Linked Set-ups
Array [5]
Range:
Function:
0
N/
A
*
[0 -
255
N/
A]
View a list of all the set-ups linked by means of
0-12 This
Set-up Linked to
. The parameter has one index for each
parameter set-up. The parameter value displayed for
each index represents which set-ups are linked to that
parameter set-up.
Index
LCP value
0
{0}
1
{1,2}
2
{1,2}
3
{3}
4
{4}
Table 3.2 Example: Set-up 1 and Set-up 2 are linked
0-14 Readout: Edit Set-ups / Channel
Range:
Function:
0
*
[-2147483648 -
2147483647 ]
for each
of the four different communication
channels. When the number is displayed in
hex, as it is in the LCP, each number
represents one channel.
Numbers 1-4 represent a set-up number; ‘F’
means factory setting; and ‘A’ means active
set-up. The channels are, from right to left:
LCP , FC-bus, USB, HPFB1-5.
Example: The number AAAAAA21h means
that the FC bus selected Set-up 2 in
, the LCP selected Set-up 1 and all
others used the active set-up.
3.2.3 0-2* LCP Display
Define the variables displayed in the Graphical Local Control
Panel.
NOTE!
Please refer to
0-37 Display Text 1
,
0-38 Display Text 2
and
0-39 Display Text 3
for information on how to write display
texts.
0-20 Display Line 1.1 Small
Option:
Function:
Select a variable for display in line
1, left position.
[0]
None
No display value selected.
[9]
Performance Monitor
[37]
Display Text 1
0-20 Display Line 1.1 Small
Option:
Function:
[38]
Display Text 2
[39]
Display Text 3
[748]
PCD Feed Forward
[953]
Profibus Warning
Word
[1005]
Readout Transmit
Error Counter
[1006]
Readout Receive Error
Counter
[1007]
Readout Bus Off
Counter
[1013]
Warning Parameter
[1230]
Warning Parameter
[1472]
VLT Alarm Word
[1473]
VLT Warning Word
[1474]
VLT Ext. Status Word
[1501]
Running Hours
[1502]
kWh Counter
[1600]
Control Word
Present control word
[1601]
Reference [Unit]
Total reference (sum of digital/
analog/preset/bus/freeze ref./
catch up and slow-down) in
selected unit.
[1602]
Reference %
Total reference (sum of digital/
analog/preset/bus/freeze ref./
catch up and slow-down) in
percent.
[1603]
Status Word
Present status word.
[1605]
Main Actual Value [%] Actual value as a percentage.
[1609]
Custom Readout
[1610]
Power [kW]
Actual power consumed by the
motor in kW.
[1611]
Power [hp]
Actual power consumed by the
motor in HP.
[1612]
Motor voltage
Voltage supplied to the motor.
[1613]
Frequency
Motor frequency, i.e., the output
frequency from the adjustable
frequency drive in Hz.
[1614]
Motor Current
Phase current of the motor
measured as effective value.
[1615]
Frequency [%]
Motor frequency, i.e., the output
frequency from the adjustable
frequency drive in percent.
[1616]
Torque [Nm]
Actual motor torque in Nm
[1617]
*
Speed [RPM]
Speed in RPM (revolutions per
minute), i.e., the motor shaft
speed in closed-loop.
Parameter Descriptions
FC 300 Programming Guide
MG.33.MA.22 - VLT
®
is a registered Danfoss trademark
3-5
3
3
