Danaher Motion B8961, Руководство оператора

Страница: 14 / 158

Chapter 3 - Keypad Operation
11
PROG Running Programs
Run an existing program by program number, by
pressing:
1.
PROG(F1)
2. Program number 1-199 using numeric keys
(1-400 available with the 30k expanded memory option)
3. ENTER
Run an existing program by name by pressing:
1.
PROG(F1)
2.
á
and
â
keys to scroll through the list of available
programs until you find the program you want
3. ENTER
JOG Jogging the Motor
Jog either axes by pressing:
1.
RUN
2. JOG(F2)
3.
ß
and
à
keys to move axis 1
á
and
â
keys to move axis 2 on a B8962.
Note:The
á
and
â
keys will also jog Axis 1 on a single axis unit.
Change between Low and High speeds with the F1 and F2 keys. Jog speeds and
accelerations can be changed in the JOG \ SETUP menu.
“Jog”an incremental distance by:
1.
RUN
2. JOG (F2)
3. Entering a number (i.e.,0.012).
4. Pressing and releasing an ar row key will make the motor move this distance.
The arrow pressed determines the direction of the move.
5. Repeat 3 and 4 until at desired position.
Additional pushes of ar row keys will jog the same distance until either, F1,F2,or F3
is pressed.This feature is intended for very fine, final positioning.The incremental
jog speed is therefore fixed at a
very low speed.
á
RUN PROGRAM
â
> 5
--
á
RUN PROGRAM
â
--
> 12 GRIND
JOG AXIS 1 +0.0000
<LO> HIGH
JOG AXIS 1 +0.0000
Dist.: .01