62
•
Z-Trak2 features reference
Z-Trak2 3D Profiler Sensors
Z-Trak2 features reference
The Z-Trak2 feature set is divided in functional categories as specified
by the profiler’s XML file
. In
the following sections, the different categories will be described, along with their features and
values.
Features are listed in a table containing 4 columns:
•
Display Name
–
Name of the feature as displayed in the
Parameter
column of the
Features
Browser
in Z-Expert.
•
Feature Name & Values
–
Name of the feature, as defined by GenICam standard or by
DALSA. If the feature represents a list, each possible value is enumerated as well.
•
Description
–
Description of the feature or value.
•
Device Version & View
–
Indicates, for each feature:
•
the device software functional level number in which the feature was introduced (different
from the firmware revision number). Features added after the initial release are in
green
.
•
whether the feature is a member of the GenICam Standard Features Naming Convention
(SFNC, tag not shown) or of the DALSA Features Naming Convention (DFNC).
•
The visibility level in which the feature can be found (
Beginner, Expert, Guru
) in Z-Expert.
Features tagged as
Invisible
are not typically needed by GUI users and therefore only
available via software API (such as Teledyne DALSA or third-party).
Feature values may be changed in Z-Expert or via an imaging application according to their
availability. The availability of a feature may depend on other feature values; several features are
always read-only. Also note that a few features may be changed during acquisition.
