Dalsa Z-Trak 2, Руководство пользователя

Страница: 87 / 167

Z-Trak2 3D Profiler Sensors Z-Trak2 features reference • 81
Display Name Feature & Values Description Device
Version
& View
Software Trigger TriggerSoftware
Writing this feature generates an internal profile
trigger.
1.00
Beginner
Trigger Start Source TriggerSource Selects the start source to use for the trigger
input. The source can be an internal or external
signal.
1.00
Beginner
Encoder Encoder1 The Profile trigger is generated by the Encoder.
Line 3 Line3 The trigger is generated by the Line 3. Not
available for Profile Trigger if Line 2 is used by
Encoder Source B.
Line 4 Line4 The trigger is generated by the Line 4.
Multi Sensor Sync MultiSensorSync Sets the Multi Sensor Sync as the profile trigger
source.
Software Software The Profile trigger is generated by the Software
Trigger command.
Timer 1 End Event Timer1End The Profile trigger is generated by the Timer
End Event.
Counter 1 End Event Counter1End The Profile trigger is generated by the Counter
End Event.
Timestamp Modulo Event timestampModuloEvent The Profile trigger is generated by the
Timestamp modulo Event.
Trigger Start Input Line
Activation TriggerActivation Selects the activation mode for the Trigger
Input. This is applicable only for external line
inputs.
1.00
Beginner
Falling Edge FallingEdge The trigger is considered valid when the line
source signal goes from high to low.
Rising Edge RisingEdge The trigger is considered valid when the line
source signal goes from low to high.
Any Edge AnyEdge The trigger is considered valid for any transition
on the line source signal.
Level High LevelHigh The trigger is considered valid while the line
source signal is high.
Trigger Overlap TriggerOverlap Selects if a new trigger will be accepted (or
latched) while the previous one is still being
processed.
1.00
Guru
Off Off No trigger overlap is permitted.
ReadOut ReadOut
Profile Trigger is accepted immediately after the
start of the image sensor readout.
Trigger Delay TriggerDelay Specifies the delay before the profile integration
starts or the scan starts.
For profile trigger mode, this value specifies the
delay in µSec.
For scan trigger modes, this value specifies the
delay in the number of profiles to skip before
starting the scan.
1.00
Beginner
Trigger Stop Source triggerStopSource Variable scan stops when the trigger stop source
is activated.
1.00
DFNC
Beginner
Line 3 Line3 The variable scan is stopped when Line 3 is
activated.
Line 4 Line4 The variable scan is stopped when Line 4 is
activated.
Trigger Stop Input Line
Activation triggerStopActivation Select the activation mode for the "Trigger Stop
Source". This is applicable only for external line
inputs.
1.00
Beginner
Falling Edge FallingEdge The trigger is considered valid when the line
source signal goes from high to low.
Rising Edge RisingEdge The trigger is considered valid when the line
source signal goes from low to high.