Dalsa Genie Nano-CXP, Руководство пользователя

Страница: 13 / 143

Genie Nano- CXP Series™ Nano-CXP Specifications • 11
Power connector Camera power via PoCXP or by the power pins on the 10-pin I/O connector
Electrical Interface
Input Voltage
+24V nominal (+12 to +26 Volts DC maximum range)
Supports the Power Over CXP standard (PoCXP)
Power Dissipation (typical) 12W @ 24Vdc aux. (for the XL case)
Environmental Conditions
Operating Temperature
(
at camera front plate )
All Models: -20°C to +65°C (-4°F to +149°F) Any metallic camera mounting provides
heat-sinking therefor reducing the internal temperature.
Operating Relative Humidity 10% to 80% non-condensing
Storage -40°C to +80°C (-4°F to +176°F) temperature at 20% to 80% non-condensing
relative humidity
Conformity CoaXPress (JIIA), EU and REACH
Sensor Cosmetic Specifications
After Factory Calibration and/or Corrections are applied (if applicable — dependent on sensor)
Blemish Specifications Maximum Number of
Defects
Blemish Description
Hot/Dead Pixel defects Typical 0.0025%
Max 0.005%
Any pixel that deviates by ±20% from the average of
neighboring pixels at 50% saturation including pixel stuck at 0
and maximum saturated value.
Spot defects none
Grouping of more than 8 pixel defects within a sub-area of 3x3
pixels, to a maximum spot size of 7x7 pixels.
Clusters defects none Grouping of more than 5 single pixel defects in a 3x3 kernel.
Column defects none
Vertical grouping of more than 10 contiguous pixel defects
along a single column.
Row defects none Horizontal grouping of more than 10 contiguous pixel defects
along a single row.
• Test conditions
• Nominal light = illumination at 50% of saturation
• Temperature of camera is 45°C
• At exposures lower than 0.25 seconds
• At nominal sensor gain (1x)