Dalsa Genie Nano-CXP, Руководство пользователя

Страница: 44 / 143

42 • Feature Descriptions Genie Nano- CXP Series™
I/O Control Feature Descriptions
Display Name Feature & Values Description Device
Version
& View
Trigger Selector TriggerSelector Selects which type of trigger to configure with the
various Trigger features.
1.00
Beginner
Single Frame Trigger(Start) FrameStart Selects a trigger starting the capture of a single frame.
Frame size is determined by image format feature
“Height”.
MultiFrame Trigger(Start) FrameBurstStart
Selects a trigger to capture multiple frames. The
number of frames is specified by the
“triggerFrameCount” feature.
Trigger Mode TriggerMode Controls the enable state of the selected trigger.
1.00
Beginner
Off Off The selected trigger is turned off.
On On The selected trigger is turned active.
Trigger Frames Count triggerFrameCount
Sets the total number of frames to acquire when a valid
trigger is received. This feature is available when Trigger
Selector = MultiFrame Trigger(Start).
1.00
DFNC
Beginner
Software Trigger TriggerSoftware
Generate a software command internal trigger
immediately no matter what the TriggerSource feature
is set to.
1.00
Beginner
Trigger Source TriggerSource Specifies the internal signal or physical input line to use
as the trigger source. The selected trigger must have its
TriggerMode set to ON.
1.00
Beginner
CXP Trigger CXP
Select CXP trigger (and associated I/O control block) to
use as the external trigger source. See LineSelector
feature for complete list.
Software Software
The trigger command source is only generated by
software using the Trigger Software command.
Line 1 Line1
Select Line 1 (and associated I/O control block) to use
as the external trigger source. See LineSelector feature
for complete list.
Line 2 Line 2 Select Line 2 (and associated I/O control block) to use
as the external trigger source. See LineSelector feature
for complete list.
Timer1End Event Timer1End Select the TimerEnd Event as the internal trigger source.
Counter1End Event Counter1End
Select the CounterEnd Event as the internal trigger
source.
Trigger Input Line Activation TriggerActivation
Select the activation mode for the selected Input Line
trigger source. This is applicable only for external line
inputs.
1.00
Beginner
Rising Edge RisingEdge
The trigger is considered valid on the rising edge of the
line source signal (after any processing by the line
inverter module).
Falling Edge FallingEdge The trigger is considered valid on the falling edge of the
line source signal (after any processing by the line
inverter module).
Level High LevelHigh The trigger is considered valid on the high level of the
line source signal. (OnSemi models only)
Level Low LevelLow The trigger is considered valid on the low level of the
line source signal. (OnSemi models only)
Trigger Delay TriggerDelay
Specifies the delay in microseconds to apply after
receiving the trigger and before activating the
triggerEvent.
1.00
Beginner