Dalsa Genie Nano-CXP, Руководство пользователя

Страница: 53 / 143

Genie Nano- CXP Series™ Feature Descriptions • 51
Counter and Timer Control Feature Descriptions
Display Name Feature & Values Description Device
Version
& View
Counter Selector counterSelector Selects the counter to configure.
1.00
Expert
DFNC
Counter 1 Counter1 Select counter 1
Counter mode counterMode Selects the counter mode. The selected Counter is
either Active or Disabled. When Disabled, the Counter
can be configured.
1.00
Expert
DFNC
Off Off The selected Counter is Disabled
Active Active The selected Counter is Enabled
Counter Status counterStatus Returns the current state of the counter.
1.00
Expert
DFNC
Counter Idle CounterIdle The counter is idle.
The counterStartSource feature is set to off.
Counter Trigger Wait CounterTriggerWait The counter is waiting for a start trigger.
Counter Active CounterActive The counter is counting for the specified duration.
Counter Completed CounterCompleted The counter reached the CounterDuration count.
Counter Overflow CounterOverflow The counter reached its maximum possible count.
Counter Start Source counterStartSource Select the counter start source. Counter increments
from 0 to the value of the counterDuration feature. 1.00
Expert
DFNC
Off Off Counter is stopped.
Exposure Start ExposureStart Counter starts on the reception of the Exposure Start
event
Exposure End ExposureEnd Counter starts on the reception of the Exposure End
event.
Readout Start ReadoutStart Counter starts on the reception of the Readout Start
event.
Readout End ReadoutEnd Counter starts on the reception of the Readout End
event.
Frame Start FrameStart Counter starts on the reception of the Frame Start
event.
Valid Frame Trigger ValidFrameTrigger Counter starts on the reception of the Valid Frame
Trigger.
Rejected Frame Trigger InvalidFrameTrigger Counter starts on the reception of the Invalid Frame
Trigger.
Line 1 Line1 Counter starts on the specified transitions on CXP or
Line 1 trigger.
Line 2 Line2 Counts the number of transisitions on Line 2 (based
on the counterIncrementaLineActivation feature
setting).
Timer 1 End Timer1End Counter starts on the reception of the Timer 1 End
event.
Counter 1 End Counter1End Counter starts on the reception of the Counter 1 End
event.
Counter Start Line
Activation counterStartLineActivation Selects the activation mode of the input line trigger
which starts the counter. This is only applicable when
the counterStartSource feature selects a physical
Line.
1.00
Expert
DFNC
Rising Edge RisingEdge Starts counting on rising edge of the selected Line.
Falling Edge FallingEdge Starts counting on falling edge of the selected Line.
Any Edge AnyEdge Starts counting on the falling or rising edge of the
selected Line.