Daikin FDMR50TVMG, Руководство по обслуживанию

Страница: 104 / 224

BRC1E63 SiSG121917E
99 Part 5 Remote Controller
1. Operation Mode
2. Airflow Rate (Air Volume/Fan
Speed)
3. ”
4. Set/Setback Temperature display
5. Defrost/Hot start “ ”
6.
7.
Displayed w hen a Heat Reclaim Ventilator
is connected.
Ventilation Mode icon. “ ”
These icons indicate the c u rrent v entilation
mode (Heat Reclaim Ventilator only)
(AUTOMATIC, E
N ERGY RECLAIM
VE N TILATIO N , BYPASS).
Air purifying icon “ ”
This icon indicates that the Air P u rifying
u nit (optional accessory) is in operation.
8. Key Locked “ ”
9. Timer Enabled “ ”
Airflow Direction “
Displays the present operation mode,
“Cool”, “Heat”, “Vent”, “Fan”, “Dry” or “A
u to”.
Displays the airflo w rate that is set for the
indoor u nit.
The airflo w rate w ill not b e displayed if the
indoor u nit does not ha v e airflo w rate
control f u nction.
Displayed w hen the airflo w direction and
s w ing are set.
This icon is not displayed if the indoor u nit
does not ha v e a f u nction to set airflo w
directions.
W hen the air conditioner is t u rned on, “Set
to” indicates the set temperat u res that are
set for the air conditioner.
W hen the air conditioner is t u rned off,
“Setback” indicates the set b ack
temperat u res that are set for the air
conditioner.
Displayed w hen a Heat Reclaim Ventilator
is connected.
For details, refer to the Operation Man
u al of
the Heat Reclaim Ventilator.
Displays if the Defrost/Hot start operation is active.
If ventilating operation “ ” is displayed:
Message
Displayed for a fe w seconds w hen an
operation bu tton is pressed and the indoor
u nit does not ha v e the corresponding
f u nction.
The following messages are displayed.
“This function not available.”
If a n u m b er of indoor u nits are in operation,
the message w ill appear only if none of the
indoor u nits is pro v ided w ith the
corresponding f u nction, i.e., the message
w ill not appear if at least one of the indoor
u nits is pro v ided w ith the corresponding
f u nction.
“Error: Push Menu button”
“Warning: Push Menu button”
Displayed if an error or w arning is detected .
“Quick Start” (Split system only)
Displayed if the qu ick cooling/heating
f u nction is t u rned on.
“Time to clean filter”
“Time to clean element”
“Time to clean filter and element”
Displayed w hen the time to clean the filter
or element has come.
Ventilation/Air Purifying
Displayed w hen the key lock is set.
Displayed if the Sched u le timer or
OFF timer is ena b led.