Daikin FDMR50TVMG, Руководство по обслуживанию

Страница: 118 / 224

Service Diagnosis SiSG121917E
113 Part 6 Service Diagnosis
3.2.3 BRC086A22 Wireless Remote Controller
1. Press INSPECTION button to select the inspection mode.
" 0 " appears on the display and blinks.
"Unit No." appears.
2. Press PROGRAMMING TIMER button and change the unit number.
Press to change the unit number until the indoor unit beeps and perform the following
operation according to the number of beeps.

3 short beeps: Perform all steps from 3 to 6.
 1 short beep: Perform steps 3 and 6.
 1 long beep: Normal state
3. Press OPERATION MODE SELECTOR button.
"
0
" on the left-hand of the malfunction code blinks.
4. Press PROGRAMMING TIMER button and change the malfunction code.
Press until the indoor unit beeps twice.
5. Press OPERATION MODE SELECTOR button.
" 0 " on the right-hand of the malfunction code blinks.
6. Press PROGRAMMING TIMER button and change the malfunction code.
Press until the indoor unit makes a long beep.
The malfunction code is fixed when the indoor unit makes a long beep.
7. Press OPERATION MODE SELECTOR button to get the display back to the normal state.
3.2.4 BRC1E63 Wired Remote Controller
1
3 5
7
2 4
6
(R24923)
1
Cool
Ret u rn Setting
Set to
Cool
2 8
°C
Error: P u sh Men u bu tton
• If a malf u nction occ u rs, either one of the follo w ing
messages w ill appear on the Basic screen d u ring
operation.
“Error: P u sh Men u bu tton.”
* The Operation lamp w ill b link.
“ W arning: P u sh Men u bu tton.”
* The Operation lamp w ill not b link.
• Press Men u /Enter bu tton.
Operation
lamp
2
Ret u rn
Error code:A1
Indoor u nit
–––/000
O u tdoor u nit –––/000
Contact Info
0123–4567–
8 900
• The Error code b links and the contact address and
model name w ill appear.
• N otify yo u r local dealer of the Error code and
Model name.
Operation