Daikin FDMR50TVMG, Руководство по обслуживанию

Страница: 58 / 224

Wall Mounted and LSP Duct Type Functions SiSG121917E
53 Part 4 Functions and Control
Note(s)
1.11 INTELLIGENT EYE Operation
Applicable
Models
CTKS25/35/50/60/71TVMG
CTKB50/60TVMG
Outline
This function detects the presence of humans in the room with a motion sensor and changes
the operation to energy saving operation when there is nobody.
Details
1. INTELLIGENT EYE detection method
 The motion sensor detects human motion by receiving infrared rays and displays the pulse
wave output.
 The microcomputer in the indoor unit carries out a sampling every 20 msec. If the motion
sensor detects 10 times or more of the wave output in one second in total, and the High
signal continues for 3 sec., the microcomputer judges humans are in the room as the human
detection signal is ON.
2. Motions (in cooling)

In FAN operation, the fan speed is reduced by 60 rpm when no one is in the area.
 When there is no signal from the motion sensor in 20 minutes, the microcomputer judges
that nobody is in the room and operates the unit at a temperature shifted from the target
temperature. (Cooling/Dry: 1 ~ 2°C higher)
For dry operation, the temperature cannot be set with a remote controller, but the target
temperature is shifted internally.
1 sec.
Sampling (20 msec.)
High
Lo w
O N
OFF
High
Lo
w
(R24035)
(Condition of 10 times or more o u tp u t)
H u man motion
3 sec. If the detection signal (High) contin u es for 3 sec. or more,
the microcomp u ter j u dges h u mans are in the room.
Detection signal
from the motion
sensor
H u man detection
signal
Motion sensor
o
u tp u t
If the motion sensor detects the o u tp u ts
10 times/sec. or more, the microcomp u ter
j u dges the detection signal from the
motion sensor is High.
O N
OFF
Reset Reset
Reset
20 min.
1 ~ 2°C
O N
OFF
O N
OFF
Operation
OFF
Fan speed (
#
)
Set speed Set speed
Target temperat u re
(R232 8 3)
Remote controller
SENSOR bu tton
H u man detection
signal
60 rpm
w ithin
20 min.
w ithin
20 min.
w ithin
20 min.