D-Link DXS-3250 - xStack Switch - Stackable Скачать руководство пользователя страница 24

Страница: 24 / 311

D-Link DXS-3250/DXS-3227P/DXS-3227 User Guide

Page 23

•

Ambient Requirements

— The ambient unit operating temperature range is 0 to 40

C (32 to 104

F) at a rel-

ative humidity of up to 95%, non-condensing. Verify that water or moisture cannot enter the device casing.

Unpacking

This section contains information for unpacking the device, and includes the following topics:

•

Package Contents

•

Unpacking Essentials

Package Contents

While unpacking the device, ensure that the following items are included:

•

The device

•

Four rubber feet with adhesive backing

•

Rack kit

•

An AC power cable

•

Console RS-232 cable with DB-9 connector

•

Documentation CD

Unpacking Essentials

Note

Before unpacking the device, inspect the package and report any evidence of damage immediately.

To unpack the device perform the following:

It is recommended to put on an ESD wrist strap and attach the ESD clip to a metal surface to act as ground.
An ESD strap is not supplied with the device.

Place the container on a clean flat surface and cut all straps securing the container.

Open the container.

Carefully remove the device from the container and place it on a secure and clean surface.

Remove all packing material.

Inspect the product for damage. Report any damage immediately.

If any item is found missing or damaged, please contact your local D-Link reseller for replacement.

Содержание DXS-3250 - xStack Switch - Stackable























































































































































































































































































































Результаты поиска

Содержание DXS-3250 - xStack Switch - Stackable

Отзывы:

Похожие инструкции для DXS-3250 - xStack Switch - Stackable

Бренды по названию

Популярные бренды

D-Link DXS-3250 - xStack Switch - Stackable, Руководство по установке в сети

Результаты поиска

Содержание DXS-3250 - xStack Switch - Stackable

Отзывы:

Похожие инструкции для DXS-3250 - xStack Switch - Stackable

Бренды по названию

Популярные бренды