Auxiliary Contacts
Aux Output 2 Example
As mentioned above, for CSM and Hi-Flo 50 softeners, this output is used for the refill solenoid. As an example,
let’s say we have a CSM-300-2 and we need to set this up for refill minutes. We are looking for a capacity
around 250,000 grains (10 lbs/ft³).
According to the chart on page 92 of the CSM installation manual (01016370), we are looking at a salt dosage
of 10.2 lbs/ft³ and need to set the ON minutes of AUX2 to 17.
Here is how to set this up:
Scroll to
ACCESSORIES
and select
Scroll to
AUX OUTPUTS
and select
Scroll to
AUX OUT 2
and select
Leave this set at
NORMALLY
OFF
. We want the output to energize (turn on) the refill
solenoid
This should be set to
SERVICE
POS
.
No delay is necessary.
For our example, this would be set to 17.
AUX
OUTPUT
3
has the same menu options. Refer to the chart on page 48 for quick reference.
Auxiliary Contacts
48
47
CULLIGAN GLOBAL ELECTRONIC CONTROLLER
> 4) accessories
> 4) aux outputs
> 2) aux out 2
3) aux out 3
system ok
7:32 am 2-1-08
aux2 cycle type
normally off
aux out 2
service pos
aux2 out
delay 0 mins
aux2 out
on 0 mins
Содержание GBE
