Culligan GBE, Инструкция по установке, эксплуатации и обслуживанию

Страница: 70 / 74

Appendix C
Pin Function
3 (input) TD (data coming FROM the GBE board)
2 (output) RD (this line is required even though no data is sent TO the GBE board)
7 (input) RTS
8 (output) CTS
5 (signal gnd) GND
The data coming from the GBE board is at the following conditions:
Bits Per Second: 9600
Data Bits: 8
Parity: None
Stop Bits: 1
Flow Control: None
The following style data cables are available from Culligan:
Cable P/N: xxxxxxxx 9-pin female RS-232 output
Cable P/N: xxxxxxxx 9-pin female RS-485 output
Cable P/N: xxxxxxxx USB style output cable - comes with CD-ROM which includes
device drivers for Microsoft Windows VISTA, XP, and
Windows 2000 operating systems
Test Data Port
Once your cables are set up, you can test your connection using the
Windows’ Hyperterminal program. This program is generally found
under Start/All Programs/Accessories/Communications/
Hyperterminal
When you open Hyperterminal it will ask you to create a name for
the connection. Enter any name you choose and click OK .
Next you are asked to select a COM port. From the drop down list,
pick the COM port with the highest number and click OK .
Next you are asked to set the properties for this COM port. They
should be set as shown.
After you click OK , Hyperterminal is ready to accept data.
Appendix C 68
67 CULLIGAN GLOBAL ELECTRONIC CONTROLLER