SMI21
47
11.2.
Description of the Monitoring Part
The monitoring part of the HMI is common to all the expert and application program tabs.
Figure
40
This zone uses graphic icons to indicate the type of program
I/O used (in this case 4 digital inputs, 2 analog setpoint inputs,
2 PWM outputs and 2 digital outputs).
This zone describes the status of the connection between the
HMI and the motor (green for connected and red for not
connected).It gives in real time (once a second) the value of
the various measurements taken on the motor (voltage,
temperature, speed, position and torque).
States of the various program digital I/O (green for active and
blue for inactive).
For the analog setpoints, the user can display their value (rpm,
rpm/sec, mN.m, etc.) on the IN5 and IN6 dial faces.
The type of error detected can be viewed on this tab.
PWM/Pulse or Frequency type outputs are not included in this
tab.
