SMI21
49
Outputs: Don't forget to fit the pull-down resistors on each of the outputs.
•
OUT1: If 0
→ setpoint position not reached,
if 1
→ setpoint position reached.
•
OUT2: If 0
→ homing phase complete,
if 1
→ homing phase in progress or not
performed.
•
OUT3: If 0
→ motor stopped,
if 1
→ motor running.
•
OUT4: If 0
→ no error,
if 1
→ error detected.
11.3.1.2. Application Settings
•
The user can give a 4-character name in "Project name" which is stored in the motor and appears in the
"Motor Information" window.
•
If it has been saved on the PC by the user, this name is used by default. For more details, see the
"Saving Parameters" paragraph.
•
The "Number of rotation(s) to close the valve" and "Mechanical ratio between the motor and the valve"
parameters are used to calculate the application total stroke in number of motor revolutions:
