CR Remeha Avanta 12v, Инструкция по установке и обслуживанию, Страница: 91 / 110

[E][6]
Unwanted flame
formation.
Ignition Unit. Faulty ignition unit, replace ignition unit.
Control unit. Faulty control unit, replace control unit.
[E][7]
No water in the
boiler or the pump
is not working.
Insufficient water. Check the water level and check for leaks.
No through flow.
Check that the pump is working; turn the
spindle with a screwdriver,
if that works but the pump still does not
respond, check the wiring;
that is in order the pump is faulty.
Too much air in the
system. Vent the system.
Pump operating in wrong
direction. Check wiring from and to control unit.
Pump not running. Check wiring, connections and pump.
[E][8] Fan fault.
Fan is not working.
Check:
•
fan function;
•
fan wiring and connection.
Fan does not stop.
Check:
•
fan function;
•
fan wiring and connection;
•
excess chimney draught.
page 46
Error
code Description Possible cause Check / solution
[E][9]
No water in the
boiler or the pump
is not working
Insufficient water in
central heating
system
Check the minimum water pressure, read off
the gauge and check for leaks
(ie. Expansion vessel)
Refill the central heating system
Bleed the central heating system
Reset boiler
Failure water
pressure switch Contact installer
[E][1][0]
No through flow
during venting
cycle.
Insufficient water. Check the water level and check for leaks.
Too much air in the
system. Vent the system.
No through flow.
•
Check that the pump is working; turn
the spindle with a screwdriver,
if that works but the pump still does
not respond, check the wiring;
if that is in order the pump is faulty;
•
Open the radiator valves.