CR Remeha Avanta 12v, Инструкция по установке и обслуживанию

Страница: 69 / 110

The boiler will automatically return to the normal operating mode if no keys
are pressed for 10 minutes.
page 36
2.10.9 Changing the maximum output (Hi) for CH operation
The maximum output for CH operation can be changed with
parameter
[P][1][7] (maximum fan speed) and is set standard to a speed of 2400,
3000, 3500, 4500 or 5200 rpm for the five System-types. See the speed-input
ratio
figures .
This parameter can be changed from the stand-by status as follows:
• Press the
[enter] -key and briefly the [reset] -key until codes [C] and [0] appear
alternately in the display;
• Press the
[+] -key until access code [1][2] is displayed;
• Press the
[enter] -key until [P][1] appears (codes [P] and [1] are displayed
alternately);
• Press the
[+] -key to go to parameter [1][7] ;
• Press the
[enter] -key until [P][1][7] appears (codes [P] and [1][7] are displayed
alternately);
• Press the
[+] or [-] key to change this value for Avanta 18v, for example
to [3][5] (3500 rpm corresponds with 18kW);
• Press
[enter] -key to confirm the value;
• Press
[reset] -key to return to the operating mode.