CR Remeha Avanta 12v, Инструкция по установке и обслуживанию

Страница: 39 / 110

R000153-B
The Remeha Avanta can therefore be controlled directly by any other
controls with this OpenTherm® logo
2.7.5 Connecting an outside temperature sensor
An outside temperature sensor can be connected to connectors 1 and 2 of the X9
terminal strip. The boiler will regulate the output using the set point of the internal
heat curve. This can be set as follows:
- Outside temperature minimum set point = -15°C (adjustable with parameter [P][2][9] to between 0 and -
30°C).
- Outside temperature maximum set point = 20°C (adjustable with parameter
[P][2][8] to between 0 and 40°C).
- Flow temperature set point at maximum outside temperature = 20°C (adjustable with parameter [P][2][7] to
between 0 and 60°C).
- Flow temperature set point at minimum outside temperature = 20°C (
[P][1] Adjustable between 20-85°C but
the highest water temperature setting for this type of boilers is limited to 75°C, see par 2.10.8 .)
An outside sensor used in conjunction with a simple 230 V time clock will
provide easy to set up and operate - timed weather compensation heating based on
the graph below.
fig. 21 Wiring diagram outside temperature sensor
R000154-B