6-12
Valleylab FT10 Energy Platform User’s Guide
After Surgery
Incomplete Seal Cycle - Time Out
Additional time and energy are needed to complete the seal cycle.
If this message appears, the user should
1. Release the foot pedal or activation button.
2. Open the instrument jaws and inspect for a successful seal.
3. Remove excess fluids from the surgical site.
4. Clean and dry the LigaSure jaws.
5. Regrasp the tissue.
6. Reactivate the seal cycle.
After Surgery
Disconnect the instruments
1. Turn off the energy platform.
2. Disconnect all instrument cords from the front panel.
•
If the instrument is single-use only (disposable), dispose of it according to the
procedures for your institution.
•
If the instrument is reusable, clean and sterilize it according to the manufacturer’s
instructions for use.
3. Disconnect and clean the foot pedal (if used) according to the instructions for use.
4. Disconnect the power plug from the wall receptacle by pulling the plug, not the cable.
