Configuration and Setup
3-27
3.11 Setup to Share the Scanner (Use from PCs on the LAN)
Your scanner can be setup to be used for scanning from PC stations on the network. This requires that
you first have setup the scanner to be recognized on the network as described in the previous section
“
Scanner on Network Setup
”
. The following will describe how to enable your scanner to be shared.
NOTE
: Using a shared scanner from a PC on the network will require scan and copy software plus
drivers installed on that PC. The scan/copy software must be compatible with the scanner and shared
scanner functionality. See your scan/copy software documentation for details and instructions.
On scanners:
FLEX50i, HD4230i
To enable a scanner for sharing:
On the iJET Panel
1. Select the
Menu
button.
2.
Use the arrow button up or down
until the display window shows
Advanced
and confirm with
the
Enter
button
.
3.
Use the arrow buttons up or down
until the display shows
Network Setup
and confirm with
.
4. Use the arrow button up or down
until the display window shows
Share Scanner
and confirm
with
to move the
“
>
”
marker down in order to change the setting.
5. Use arrows down/up
to select
YES and c
onfirm with
Enter
.
The scanner will then be
enabled for shared scanning from PCs on the network.
6. Reboot the scanner to ensure that the setting is applied on the network.
Change value to
“
YES
”
and confirm with
Enter
Share Scanner
> YES
Press
Enter
to confirm Share Scanner setup and
move the
‘
>
’
marker down to change the setting.
Share Scanner
> NO
Enter
Press
Enter
to confirm
Network setup
> Network Setup
…
Enter
Menu
Enter
