Club Car Carryall 500, Руководство по техническому обслуживанию и ремонту

Страница: 335 / 456

ELECTRICAL COMPONENTS: PEDAL-START
GAS VEHICLE Starter/Generator
20
39
36
35
32
33
33
40
41
43
1342
Figure 20-6 Output End Cover Assembly, Armature and Housing
BEARING CLEANING AND INSPECTION
1. Using a clean cloth, wipe the carbon dust from the two bearings. Inspect bearings by spinning them by hand and
checking for both axial (A) and radial (B) play
(Figure 20-7, Page 20-5) .
2. Replace the bearing if it is noisy, does not spin smoothly, or has excessive play. Check the bearings and replace if
rusted, worn, cracked, or if there is an abnormal color change in the metal of the bearing. Bearings should be
replaced if there is extensive wear or pitting on the balls or on the rolling surfaces. Do not remove the bearings
unless they are to be replaced.
A
B
493
Figure 20-7 Bearing Play Inspection
2017 Carryall 500 and 700 Maintenance and Service Manual Page 20-5