Cisco ONS 15454, Руководство по установке оборудования

Страница: 507 / 516

Table 47: ONS 15454 M6 DC Power Specifications
Maximum
Load Input Voltage Range Current Nominal
Voltage Rating DC Power
Module
1440 W –40.5 to –57.6 VDC 30
Amp –48 VDC 30
Amp 15454-M6-DC
–50 to –72 VDC 24
Amp –60 VDC
960 W –40.5 to –57.6 VDC 20
Amp –48 VDC 20
Amp 15454-M6-DC20
–50 to –72 VDC 16
Amp –60 VDC
1920 W –40.5 to –57.6 VDC 40
Amp -48 VDC 40
Amp 15454-M6-DC40
–50 to –72 VDC 32
Amp -60 VDC
When the ONS 15454 M6 shelf is powered at –60 VDC (nominal), only these cards can be installed: TNC,
OPT-AMP-C, OPT-AMP-17-C, OPT-EDFA-17, OPT-EDFA-24, 17 SMR9 FS, 24 SMR9 FS, 34 SMR9 FS,
SMR20 FS, SMR20 FS CV, 12-AD-FS, 16-AD-FS, 100GS-CK-LC, MR-MXP cards, and the
15454-M6-ECU-60 card. Note
• 15454-M6-DC, 15454-M6-DC20, and 15454-M6-DC40 shelf power consumption (configuration
dependent):
• 130 W with 15454-M6-FTA Fan Tray, LCD, and ECU module
• 140 W with 15454-M6-FTA2 Fan Tray, LCD, and ECU module
• When you use the 60V DC power module for ONS 15454 M6, you must go to CTC (shelf-view)
Provisioning > General > Power Monitor and set the following threshold values:
• ELWBATVG (Extreme Low Battery Voltage)=-50 Vdc
• LWBATVG (Low Battery Voltage)=-50 Vdc
• HIBATVG (High Battery Voltage)=-72 Vdc
• EHIBATVG (Extreme High Battery Voltage)=-72 Vdc
• Power terminals—DSUB 3 poles for ETSI applications and terminal block, double pole for ANSI
applications.
• External fuse must not exceed 40 A
Cisco ONS 15454 Hardware Installation Guide
477
Hardware Specifications
Hardware Specifications