manualshive.com logo in svg

Cisco ME 2400, Руководство системного сообщения, Страница: 99 / 106

Поделиться
Скачать
Cisco ME 2400 Скачать руководство пользователя страница 99

 

2-87

Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide

OL-9641-04

Chapter 2      Messages and Recovery Procedures

UDLD Messages

UDLD Messages

This section contains UniDirectional Link Detection (UDLD) messages.

Error Message   

UDLD-0-STOPPED:UDLD process stopped:[chars]. 

Explanation   

This message means that the UDLD process stopped because it cannot read the unique 

system identifier that is being used by UDLD. The system identifier is used to identify the device 
that is sending the UDLD packets. [chars] is the UDLD process name.

Recommended Action   

Reload the switch by using the 

reload

 privileged EXEC command. If the 

problem persists, copy the message exactly as it appears on the console or in the system log. 
Research and attempt to resolve the error by using the Output Interpreter. Enter the 

show 

tech-support 

user EXEC command to gather data that might help identify the nature of the error. 

Use the Bug Toolkit to look for similar reported problems. If you still require assistance, open a case 
with the TAC, or contact your Cisco technical support representative, and provide the representative 
with the gathered information. For more information about these online tools and about contacting 
Cisco, see the 

“Error Message Traceback Reports” section on page 1-3

.

Error Message   

UDLD-3-UDLD_IDB_ERROR: UDLD error handling [chars] interface [chars]. 

Explanation   

This message means that a software error occurred in UDLD processing associated with 

a specific interface. The first [chars] is the event, and the second [chars] is the interface.

Recommended Action   

Copy the message exactly as it appears on the console or in the system log. 

Research and attempt to resolve the error by using the Output Interpreter. Enter the 

show 

tech-support 

user EXEC command to gather data that might help identify the nature of the error. 

Use the Bug Toolkit to look for similar reported problems. If you still require assistance, open a case 
with the TAC, or contact your Cisco technical support representative, and provide the representative 
with the gathered information. For more information about these online tools and about contacting 
Cisco, see the 

“Error Message Traceback Reports” section on page 1-3

.

Error Message   

UDLD-3-UDLD_INTERNAL_ERROR: UDLD internal error [chars]. 

Explanation   

This message means that a software check failed during UDLD processing. [chars] is a 

description of the internal error.

Recommended Action   

Copy the message exactly as it appears on the console or in the system log. 

Research and attempt to resolve the error by using the Output Interpreter. Enter the 

show 

tech-support 

user EXEC command to gather data that might help identify the nature of the error. 

Use the Bug Toolkit to look for similar reported problems. If you still require assistance, open a case 
with the TAC, or contact your Cisco technical support representative, and provide the representative 
with the gathered information. For more information about these online tools and about contacting 
Cisco, see the 

“Error Message Traceback Reports” section on page 1-3

.

Содержание ME 2400











































































































Отзывы:

Нет отзывов