2-4
Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide
OL-9641-04
Chapter 2 Messages and Recovery Procedures
ACLMGR Messages
Error Message
ACLMGR-3-AUGMENTFAIL: Augmenting of access-map [chars] on [chars]
label [dec] failed.
Explanation
This message means that the system ran out of CPU DRAM when attempting to merge
internally required elements with the configured access maps. The first [chars] is the access-map
name, the second [chars] is the direction in which the map was applied (
input
or
output
), and [dec]
is the label number.
Recommended Action
Reduce other system activity to ease memory demands.
Error Message
ACLMGR-3-IECPORTLABELERROR: ACL labels are out-of-sync on interface
[chars], label [dec] is not available on asic [dec].
Explanation
This message means that an internal software error has occurred. [chars] is the interface
name. The first [dec] is the label associated with the ACL, and the second [dec] is the ASIC number.
Recommended Action
Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or
contact your Cisco technical support representative, and provide the representative with the gathered
information. For more information about these online tools and about contacting Cisco, see the
“Error
Message Traceback Reports” section on page 1-3
.
Error Message
ACLMGR-3-INSERTFAIL: Insert of access-map [chars] #[dec] into [chars]
label [dec] failed.
Explanation
This message means that the system ran out of CPU memory when trying to merge
sections of an access map. The first [chars] is the map name, and the second [chars] is the direction
in which the map was applied. The first [dec] is the entry number, and the second [dec] is the label
number.
Recommended Action
Reduce other system activity to ease memory demands. For example, remove
any ACLs that have been defined but are not now used. Use simpler ACLs with fewer access control
entries (ACEs). Use fewer VLANs, and remove any unneeded VLANs from the VLAN database.
Error Message
ACLMGR-3-INTTABLE: Not in truth table: VLMAP [dec] RACL [dec] Mcb [dec]
Feat [dec].
Explanation
This message means that an unrecoverable software error occurred while trying to
merge the configured input features. [dec] are internal action codes.
Recommended Action
Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error by using the Output Interpreter. Enter the
show
running-config
user EXEC command to gather data that might help identify the nature of the error.
Use the Bug Toolkit to look for similar reported problems. If you still require assistance, open a case
with the TAC, or contact your Cisco technical support representative, and provide the representative
with the gathered information. For more information about these online tools and about contacting
Cisco, see the
“Error Message Traceback Reports” section on page 1-3
.