manualshive.com logo in svg

Cisco ME 2400, Руководство системного сообщения, Страница: 62 / 106

Поделиться
Скачать
Cisco ME 2400 Скачать руководство пользователя страница 62

 

2-50

Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide

OL-9641-04

Chapter 2      Messages and Recovery Procedures

PM Messages

with the TAC, or contact your Cisco technical support representative, and provide the representative 
with the gathered information. For more information about these online tools and about contacting 
Cisco, see the 

“Error Message Traceback Reports” section on page 1-3

.

Error Message   

PM-4-BAD_CARD_SLOT: an invalid card slot ([dec]) was detected. 

Explanation   

This message means that the port manager detected an invalid request. [dec] is the slot 

number.

Recommended Action   

Copy the message exactly as it appears on the console or in the system log. 

Research and attempt to resolve the error by using the Output Interpreter. Enter the 

show 

tech-support 

user EXEC command to gather data that might help identify the nature of the error. 

Use the Bug Toolkit to look for similar reported problems. If you still require assistance, open a case 
with the TAC, or contact your Cisco technical support representative, and provide the representative 
with the gathered information. For more information about these online tools and about contacting 
Cisco, see the 

“Error Message Traceback Reports” section on page 1-3

.

Error Message   

PM-4-BAD_COOKIE: [chars] was detected. 

Explanation   

This message means that the port manager detected an invalid request. [chars] is the 

invalid request.

Recommended Action   

Copy the message exactly as it appears on the console or in the system log. 

Research and attempt to resolve the error by using the Output Interpreter. Enter the 

show 

tech-support 

user EXEC command to gather data that might help identify the nature of the error. 

Use the Bug Toolkit to look for similar reported problems. If you still require assistance, open a case 
with the TAC, or contact your Cisco technical support representative, and provide the representative 
with the gathered information. For more information about these online tools and about contacting 
Cisco, see the 

“Error Message Traceback Reports” section on page 1-3

.

Error Message   

PM-4-BAD_HA_ENTRY_EVENT: Invalid Host access entry event ([dec]) is 

received. 

Explanation   

This message means that an invalid host access entry event was received; the host access 

table entry event should be an add, delete, or update event. [dec] is the event that is received.

Recommended Action   

Copy the message exactly as it appears on the console or in the system log. 

Research and attempt to resolve the error by using the Output Interpreter. Enter the 

show 

tech-support 

user EXEC command to gather data that might help identify the nature of the error. 

Use the Bug Toolkit to look for similar reported problems. If you still require assistance, open a case 
with the TAC, or contact your Cisco technical support representative, and provide the representative 
with the gathered information. For more information about these online tools and about contacting 
Cisco, see the 

“Error Message Traceback Reports” section on page 1-3

.

Содержание ME 2400











































































































Отзывы:

Нет отзывов