manualshive.com logo in svg

Cisco ME 2400, Руководство системного сообщения, Страница: 71 / 106

Поделиться
Скачать
Cisco ME 2400 Скачать руководство пользователя страница 71

 

2-59

Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide

OL-9641-04

Chapter 2      Messages and Recovery Procedures

QOSMGR Messages

Error Message   

QOSMGR-3-FAIL_TO_UPDATE_TX_QOS_LABEL: Failed to update transmit QoS 

label to queue mapping. 

Explanation   

This message means that an internal software error has occurred.

Recommended Action   

Copy the message exactly as it appears on the console or in the system log. 

Research and attempt to resolve the error by using the Output Interpreter. Enter the 

show 

running-config 

user EXEC command to gather data that might help identify the nature of the error. 

Use the Bug Toolkit to look for similar reported problems. If you still require assistance, open a case 
with the TAC, or contact your Cisco technical support representative, and provide the representative 
with the gathered information. For more information about these online tools and about contacting 
Cisco, see the 

“Error Message Traceback Reports” section on page 1-3

.

Error Message   

QOSMGR-3-HW_PROGRAM_Q_SHAPE_FAIL: Error in programming hardware for 

queue shape in policy class. 

Explanation   

This message means that an internal software error has occurred. 

Recommended Action   

Copy the message exactly as it appears on the console or in the system log. 

Research and attempt to resolve the error by using the Output Interpreter. Enter the 

show 

running-config 

user EXEC command to gather data that might help identify the nature of the error. 

Use the Bug Toolkit to look for similar reported problems. If you still require assistance, open a case 
with the TAC, or contact your Cisco technical support representative, and provide the representative 
with the gathered information. For more information about these online tools and about contacting 
Cisco, see the 

“Error Message Traceback Reports” section on page 1-3

.

Error Message   

QOSMGR-3-POLICER_PER_PORT_EXCEEDED: Policers per port limit exceeded 

in hardware. 

Explanation   

This message means that an internal software error has occurred. 

Recommended Action   

Copy the message exactly as it appears on the console or in the system log. 

Research and attempt to resolve the error by using the Output Interpreter. Enter the 

show 

running-config 

user EXEC command to gather data that might help identify the nature of the error. 

Use the Bug Toolkit to look for similar reported problems. If you still require assistance, open a case 
with the TAC, or contact your Cisco technical support representative, and provide the representative 
with the gathered information. For more information about these online tools and about contacting 
Cisco, see the 

“Error Message Traceback Reports” section on page 1-3

.

Error Message   

QOSMGR-3-HW_PROGRAM_WRITE_PORT_POLICER_FAIL: Failed to program port 

policer. 

Explanation   

This message means that an internal software error has occurred.

Recommended Action   

Copy the message exactly as it appears on the console or in the system log. 

Research and attempt to resolve the error by using the Output Interpreter. Enter the 

show 

running-config 

user EXEC command to gather data that might help identify the nature of the error. 

Use the Bug Toolkit to look for similar reported problems. If you still require assistance, open a case 
with the TAC, or contact your Cisco technical support representative, and provide the representative 
with the gathered information. For more information about these online tools and about contacting 
Cisco, see the 

“Error Message Traceback Reports” section on page 1-3

.

Содержание ME 2400











































































































Отзывы:

Нет отзывов