manualshive.com logo in svg

Cisco ME 2400, Руководство системного сообщения, Страница: 56 / 106

Поделиться
Скачать
Cisco ME 2400 Скачать руководство пользователя страница 56

 

2-44

Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide

OL-9641-04

Chapter 2      Messages and Recovery Procedures

PLATFORM_SPAN Messages

Error Message   

PLATFORM_PM-3-INTVLANINUSE: internal vlan-id [dec] allocated for 

interface [chars] is still in use. 

Explanation   

This message means that an internal VLAN ID allocated for an interface is still in use. 

[dec] is the VLAN ID, and [chars] is the interface.

Recommended Action   

Copy the message exactly as it appears on the console or in the system log. 

Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to 
look for similar reported problems. If you still require assistance, open a case with the TAC, or 
contact your Cisco technical support representative, and provide the representative with the gathered 
information. For more information about these online tools and about contacting Cisco, see the 

“Error 

Message Traceback Reports” section on page 1-3

.

Error Message   

PLATFORM_PM-3-NOINTVLAN: internal vlan of interface [chars] is not 

active for vlan-id [dec]. 

Explanation   

This message means that internal vlan_data is not active for the given VLAN ID. [chars] 

is the interface, and [dec] is the VLAN ID.

Recommended Action   

Copy the message exactly as it appears on the console or in the system log. 

Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to 
look for similar reported problems. If you still require assistance, open a case with the TAC, or 
contact your Cisco technical support representative, and provide the representative with the gathered 
information. For more information about these online tools and about contacting Cisco, see the 

“Error 

Message Traceback Reports” section on page 1-3

.

PLATFORM_SPAN Messages

This section contains the Switched Port Analyzer (SPAN) messages.

Error Message   

PLATFORM_SPAN-3-PACKET_DROP: Decreases egress SPAN rate.

Explanation   

This message means that egress SPAN rates are falling because SPAN is enabled with 

multicast routing or fallback bridging.

Recommended Action   

Find out more about the error by using the 

show tech-support

 privileged EXEC 

command and by copying the error message exactly as it appears on the console or system log and 
entering it in the Output Interpreter tool. Use the Bug Toolkit to look for similar reported problems. For 
more information about these online tools and about contacting Cisco, see the 

“Error Message 

Traceback Reports” section on page 1-3

.

Содержание ME 2400











































































































Отзывы:

Нет отзывов