Cisco ME 2400 Скачать руководство пользователя страница 25

Страница: 25 / 106

2-13

Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide

OL-9641-04

Chapter 2 Messages and Recovery Procedures

DOT1X Messages

Error Message

DOT1X-5-ERR_CHANNELLING: Dot1x can not be enabled on Channelling

ports.

Explanation

This message means that 802.1x could not be enabled on the channeling port. Trying to

set 802.1x port-control to

auto

force-unauthorized

(force_unauth) mode on a channeling port,

which is not allowed, caused this condition.

Recommended Action

Disable channeling on the interface, and then enable 802.1x.

Error Message

DOT1X-5-ERR_DYNAMIC: Dot1x can not be enabled on Dynamic ports.

Explanation

This message means that 802.1x could not be enabled on the dynamic mode port. Trying

to set 802.1x port-control to

auto

force-unauthorized

(force_unauth) mode on a dynamic mode

port, which is not allowed, caused this condition.

Recommended Action

Disable dynamic mode on the interface, and then enable 802.1x.

Error Message

DOT1X-5-ERR_DYNAMIC_VLAN: Dot1x can not be enabled on dynamic VLAN

ports.

Explanation

This message means that 802.1x could not be enabled on the dynamic VLAN port.

Trying to set 802.1x port-control to

auto

force-unauthorized

(force_unauth) mode on a dynamic

VLAN port, which is not allowed, caused this condition.

Recommended Action

Disable dynamic VLAN configuration on the interface, and then enable

802.1x.

Error Message

DOT1X-5-ERR_INVALID_TUNNEL_MEDIUM_TYPE: Got an invalid value [chars]

for TUNNEL_MEDIUM_TYPE [chars].

Explanation

This message means that the provided tunnel medium is either unsupported or invalid.

[chars] is the text received from the RADIUS server.

Recommended Action

Change the value to a valid tunnel medium.

Error Message

DOT1X-5-ERR_INVALID_TUNNEL_TYPE: Got an invalid value of [chars] for

TUNNEL_TYPE [chars].

Explanation

This message means that the provided tunnel type is either unsupported or invalid.

[chars] is the text received from the RADIUS server.

Recommended Action

Change the value to a valid tunnel type.

Содержание ME 2400











































































































Результаты поиска

Содержание ME 2400

Отзывы:

Cisco ME 2400, Руководство системного сообщения, Страница: 25 / 106

Результаты поиска

Содержание ME 2400

Отзывы: