Cisco ME 2400 Скачать руководство пользователя страница 53 | Manualshive

Страница: 53 / 106

Cisco ME 2400 Скачать руководство пользователя страница 53

2-41

Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide

OL-9641-04

Chapter 2 Messages and Recovery Procedures

PLATFORM_ENV Messages

Error Message

PLATFORM_ENV-1-EXTERNAL_ALARM_CONTACT_CLEAR: Alarm cleared: %s.

Note

This message applies only to the Cisco ME 3400E switch.

Explanation

An error condition was cleared on external alarm contact.

Recommended Action

Copy the message exactly as it appears on the console or in the system log.

Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or
contact your Cisco technical support representative, and provide the representative with the gathered
information. For more information about these online tools and about contacting Cisco, see the

“Error

Message Traceback Reports” section on page 1-3

.

Error Message

PLATFORM_ENV-1-FRU_PS_FAN_FAILED: Faulty PS%s fan detected.

Note

This message applies only to the Cisco ME 3400E switch.

Explanation

A power-supply fan failure was detected.

Recommended Action

Replace the faulty fan.

Error Message

PLATFORM_ENV-1-FRU_PS_FAN_OK: PS%s fan ok.

Note

This message applies only to the Cisco ME 3400E switch.

Explanation

The power-supply fan module is working correctly.

Recommended Action

No action is required.

Error Message

PLATFORM_ENV-1-FRU_PS_OIR: FRU Power Supply %s.

Note

This message applies only to the Cisco ME 3400E switch.

Explanation

A power-supply moduel was inserted or removed.

Recommended Action

No action is required.

«
...
51
52
53
54
55
...
»

Содержание ME 2400











































































































Отзывы:

Нет отзывов