manualshive.com logo in svg

Cisco ME 2400, Руководство системного сообщения, Страница: 58 / 106

Поделиться
Скачать
Cisco ME 2400 Скачать руководство пользователя страница 58

 

2-46

Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide

OL-9641-04

Chapter 2      Messages and Recovery Procedures

PLATFORM_UCAST Messages

Error Message   

PLATFORM_UCAST-3-DYNAMIC: [chars].

Explanation   

This message means that the dynamic address tracking mechanism for unicast routing 

encountered an error. [chars] describes the error.

Recommended Action   

Copy the message exactly as it appears on the console or in the system log. 

Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to 
look for similar reported problems. If you still require assistance, open a case with the TAC, or 
contact your Cisco technical support representative, and provide the representative with the gathered 
information. For more information about these online tools and about contacting Cisco, see the 

“Error 

Message Traceback Reports” section on page 1-3

.

Error Message   

PLATFORM_UCAST-3-ERROR: [chars].

Explanation   

This message means that an internal unicast routing error occurred. [chars] describes the 

error.

Recommended Action   

Copy the message exactly as it appears on the console or in the system log. 

Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to 
look for similar reported problems. If you still require assistance, open a case with the TAC, or 
contact your Cisco technical support representative, and provide the representative with the gathered 
information. For more information about these online tools and about contacting Cisco, see the 

“Error 

Message Traceback Reports” section on page 1-3

.

Error Message   

PLATFORM_UCAST-3-HSRP: [chars].

Explanation   

This message means that the Hot Standby Router Protocol (HSRP) module for unicast 

routing encountered an error. [chars] describes the error.

Recommended Action   

Copy the message exactly as it appears on the console or in the system log. 

Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to 
look for similar reported problems. If you still require assistance, open a case with the TAC, or 
contact your Cisco technical support representative, and provide the representative with the gathered 
information. For more information about these online tools and about contacting Cisco, see the 

“Error 

Message Traceback Reports” section on page 1-3

.

Error Message   

PLATFORM_UCAST-3-INTERFACE: [chars]. 

Explanation   

This message means that a unicast routing interface error occurred. [chars] describes the 

error.

Recommended Action   

Copy the message exactly as it appears on the console or in the system log. 

Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to 
look for similar reported problems. If you still require assistance, open a case with the TAC, or 
contact your Cisco technical support representative, and provide the representative with the gathered 
information. For more information about these online tools and about contacting Cisco, see the 

“Error 

Message Traceback Reports” section on page 1-3

.

Содержание ME 2400











































































































Отзывы:

Нет отзывов