manualshive.com logo in svg

Cisco ME 2400, Руководство системного сообщения, Страница: 74 / 106

Поделиться
Скачать
Cisco ME 2400 Скачать руководство пользователя страница 74

 

2-62

Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide

OL-9641-04

Chapter 2      Messages and Recovery Procedures

QOSMGR Messages

Error Message   

QOSMGR-3-QUEUE_PTR_ERROR: queue pointers out of order [hex] [hex] 

[hex] [hex]. 

Explanation   

This message means that an internal software error has occurred. [hex] [hex] [hex] [hex] 

are the software-computed queue pointer values. The parameters provide error details for Cisco 
Technical Support.

Recommended Action   

Copy the message exactly as it appears on the console or in the system log. 

Research and attempt to resolve the error by using the Output Interpreter. Enter the 

show 

running-config 

user EXEC command to gather data that might help identify the nature of the error. 

Use the Bug Toolkit to look for similar reported problems. If you still require assistance, open a case 
with the TAC, or contact your Cisco technical support representative, and provide the representative 
with the gathered information. For more information about these online tools and about contacting 
Cisco, see the 

“Error Message Traceback Reports” section on page 1-3

.

Error Message   

QOSMGR-3-FEATURE_NOT_FOUND: Cannot find feature for [chars]. 

Explanation   

This message means that an internal software error has occurred. [chars] is the 

description of the feature that the software cannot find.

Recommended Action   

Copy the message exactly as it appears on the console or in the system log. 

Research and attempt to resolve the error by using the Output Interpreter. Enter the 

show 

running-config 

user EXEC command to gather data that might help identify the nature of the error. 

Use the Bug Toolkit to look for similar reported problems. If you still require assistance, open a case 
with the TAC, or contact your Cisco technical support representative, and provide the representative 
with the gathered information. For more information about these online tools and about contacting 
Cisco, see the 

“Error Message Traceback Reports” section on page 1-3

.

Error Message   

QOSMGR-3-NO_VMR_QOSLABEL: qm_generate_vmrs have no qos label. 

Explanation   

This message means that an internal software error has occurred.

Recommended Action   

Copy the message exactly as it appears on the console or in the system log. 

Research and attempt to resolve the error by using the Output Interpreter. Enter the 

show 

running-config 

user EXEC command to gather data that might help identify the nature of the error. 

Use the Bug Toolkit to look for similar reported problems. If you still require assistance, open a case 
with the TAC, or contact your Cisco technical support representative, and provide the representative 
with the gathered information. For more information about these online tools and about contacting 
Cisco, see the 

“Error Message Traceback Reports” section on page 1-3

.

Error Message   

QOSMGR-3-NO_POLICER_QOSLABEL: Creating port Class Label Failed. 

Explanation   

This message means that an internal software error has occurred.

Recommended Action   

Copy the message exactly as it appears on the console or in the system log. 

Research and attempt to resolve the error by using the Output Interpreter. Enter the 

show 

running-config 

user EXEC command to gather data that might help identify the nature of the error. 

Use the Bug Toolkit to look for similar reported problems. If you still require assistance, open a case 
with the TAC, or contact your Cisco technical support representative, and provide the representative 
with the gathered information. For more information about these online tools and about contacting 
Cisco, see the 

“Error Message Traceback Reports” section on page 1-3

.

Содержание ME 2400











































































































Отзывы:

Нет отзывов