Cisco Cisco ONS 15600 SDH, Руководство по устранению неисправностей

Страница: 273 / 318

4-17
Cisco ONS 15600 SDH Troubleshooting Guide, R8.0
July 2010
Chapter 4 Error Messages
EID-3041 An error occurred while applying changes. CTC is unable to create a protection group.
Check if the protect port supports circuits, a
timing reference, SONET RS-DCC,
orderwire, or a test access point.
EID-3042 The flow control low value must be less than the flow control
high value for all ports in the card. Refer to the error message text.
EID-3046 The flow control watermark value must be between {0} and
{1}, inclusive. The flow control watermark value must be
between the two specified values.
EID-3047 The file {0} could not be read.
Please verify the name and try again.
Refer to the error message text.
EID-3048 There is no Cisco IOS startup configuration file available to
download. CTC could not find the configuration file
for Cisco IOS startup.
EID-3049 The download cannot be done at this time because an update in
progress. Refer to the error message text.
EID-3050 An error occurred while trying to save the file to your local file
system. Check whether the file already exists and
cannot be over written, or there is a space
constraint in the file system.
EID-3051 The configuration file has a maximum size of {0} bytes. The size of the configuration file should not
exceed the specified number of bytes.
EID-3052 An error occurred while saving the configuration file to the
TCC2/TCC2P. Refer to the error message text.
EID-3053 The value of {0} must be between {1} and {2}. The value of the item must be between the
specified values.
EID-3054 The provisioned input/output ports cannot be removed or
another user is updating the card. Please try to remove these
ports later. Another user may be updating the card. You
can try again later.
EID-3055 The soak maintenance pane cannot be created. Refer to the error message text.
EID-3056 Defaults cannot be saved to the file {0}. CTC cannot save the defaults to the
specified file.
EID-3057 Default properties cannot be loaded from the node. Refer to the error message text.
EID-3058 The file {0} does not exist. Refer to the error message text.
EID-3059 An error occurred while refreshing. There was an error while refreshing.
EID-3060 The ALS recovery pulse interval must be between {0} seconds
and {1} seconds. The automatic laser shutdown (ALS)
Recovery Interval must be between the
specified range of seconds.
EID-3061 The ALS recovery pulse duration must be between {0} seconds
and {1} seconds. The ALS Recovery Duration must be
between the specified range of seconds.
EID-3062 An error occurred while setting values in the table. Refer to the error message text.
EID-3064 This is not a G1000 card. This card is not a G1000-4 card.
Table 4-1 Error Messages (continued)
Error Warning
ID
Error Warning Message Description