manualshive.com logo in svg

Cisco Catalyst 3550, Руководство по настройке программного обеспечения

Функциональный коммутатор Cisco Catalyst 3550 предлагает широкий спектр возможностей для настройки сети. Пользователи могут легко настроить устройство, используя Бесплатное руководство по программному обеспечению, которое можно скачать с manualshive.com. Удобный интерфейс и высокое качество работы делают Catalyst 3550 отличным выбором для вашей сети.

Поделиться
Скачать
background image

 

21-4

Catalyst 3550 Multilayer Switch Software Configuration Guide

78-11194-03

Chapter 21      Configuring EtherChannel

Understanding EtherChannel

PAgP Modes

Table 21-1

 shows the user-configurable EtherChannel modes for the channel-group interface 

configuration command: on, auto, and desirable. Switch interfaces exchange PAgP packets only with 
partner interfaces configured in the auto or desirable modes; interfaces configured in the on mode do 
not exchange PAgP packets.

Both the auto and desirable modes allow interfaces to negotiate with partner interfaces to determine if 
they can form an EtherChannel based on criteria such as interface speed and, for Layer 2 EtherChannels, 
trunking state and VLAN numbers. 

Interfaces can form an EtherChannel when they are in different PAgP modes as long as the modes are 
compatible. For example:

•

An interface in desirable mode can form an EtherChannel with another interface that is in desirable 
or auto mode.

•

An interface in auto mode can form an EtherChannel with another interface in desirable mode. 

•

An interface in auto mode cannot form an EtherChannel with another interface that is also in auto 
mode because neither interface starts PAgP negotiation.

An interface in the on mode that is added to a port channel is forced to have the same characteristics as 
the already existing on mode interfaces in the channel.

Caution

You should exercise care when setting the mode to on (manual configuration). All ports configured 
in the on mode are bundled in the same group and are forced to have similar characteristics. If the 
group is misconfigured, packet loss or STP loops might occur.

If your switch is connected to a partner that is PAgP-capable, you can configure the switch interface for 
nonsilent operation by using the non-silent keyword. If you do not specify non-silent with the auto or 
desirable mode, silent mode is assumed. 

The silent mode is used when the switch is connected to a device that is not PAgP-capable and seldom, 
if ever, sends packets. An example of a silent partner is a file server or a packet analyzer that is not 
generating traffic. In this case, running PAgP on a physical port connected to a silent partner prevents 
that switch port from ever becoming operational; however, the silent setting allows PAgP to operate, to 
attach the interface to a channel group, and to use the interface for transmission.

Table 21-1

EtherChannel Modes

Mode

Description

auto 

Places an interface into a passive negotiating state, in which the interface responds to PAgP 
packets it receives but does not start PAgP packet negotiation. This setting minimizes the 
transmission of PAgP packets and is the default.

desirable  Places an interface into an active negotiating state, in which the interface starts 

negotiations with other interfaces by sending PAgP packets.

on 

Forces the interface to channel without PAgP. With the on mode, a usable EtherChannel 
exists only when an interface group in the on mode is connected to another interface group 
in the on mode.

Содержание Catalyst 3550































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Catalyst 3550

DAVIS WeatherLink Addendum preview
WeatherLink
Бренд: DAVIS Страницы: 20
Accordiva SecuExpress User Manual preview
SecuExpress
Бренд: Accordiva Страницы: 31
Aastra MX-ONE 4.2 User Manual preview
MX-ONE 4.2
Бренд: Aastra Страницы: 46
Fortinet FortiClient Datasheet preview
FortiClient
Бренд: Fortinet Страницы: 4
Microtek ScanWizard Pro Reference Manual preview
ScanWizard Pro
Бренд: Microtek Страницы: 177
AMIGOPOD AMIGOPOD 0.99.35 Integration Manual preview
AMIGOPOD 0.99.35
Бренд: AMIGOPOD Страницы: 23
AMIGOPOD AMIGOPOD Integration Manual preview
AMIGOPOD
Бренд: AMIGOPOD Страницы: 47
Adobe 22020772 Using Manual preview
22020772
Бренд: Adobe Страницы: 8
eCopy 3323B001 - imageFORMULA ScanFront 220e Installation And Setup Manual preview
3323B001 - imageFORMULA ScanFront 220e
Бренд: eCopy Страницы: 192
GRASS VALLEY JUPITER VSD Datasheet preview
JUPITER VSD
Бренд: GRASS VALLEY Страницы: 2
Oracle B31540-02 Implementation Manual preview
B31540-02
Бренд: Oracle Страницы: 110
FieldServer FS-8700-64 Driver Manual preview
FS-8700-64
Бренд: FieldServer Страницы: 22
Autodesk 003A1-121111-1001 - AutoSketch v.9.0 Getting Started preview
003A1-121111-1001 - AutoSketch v.9.0
Бренд: Autodesk Страницы: 130
MACROMEDIA FLASH MX 2004-LEARNING FLASH Manual preview
FLASH MX 2004-LEARNING FLASH
Бренд: MACROMEDIA Страницы: 122
TC Electronic PowerCore Master X3 Product Manual preview
PowerCore Master X3
Бренд: TC Electronic Страницы: 11
Canon BJC-S330 Application Manual preview
BJC-S330
Бренд: Canon Страницы: 170
Canon CAPTUREPERFECT 3.1 Operation Manual preview
CAPTUREPERFECT 3.1
Бренд: Canon Страницы: 85
Navman S60 User Manual preview
S60
Бренд: Navman Страницы: 15

Бренды по названию

Популярные бренды

Загрузить еще бренды