manualshive.com logo in svg

Cisco Catalyst 3550, Руководство по настройке программного обеспечения

Функциональный коммутатор Cisco Catalyst 3550 предлагает широкий спектр возможностей для настройки сети. Пользователи могут легко настроить устройство, используя Бесплатное руководство по программному обеспечению, которое можно скачать с manualshive.com. Удобный интерфейс и высокое качество работы делают Catalyst 3550 отличным выбором для вашей сети.

Поделиться
Скачать
background image

 

xxix

Catalyst 3550 Multilayer Switch Software Configuration Guide

78-11194-03

Preface

Organization

Chapter 14, “Configuring UDLD,”

 describes how to configure the UniDirectional Link Detection 

(UDLD) feature. UDLD enables devices connected through fiber-optic or twisted-pair Ethernet cables 
to monitor the physical configuration of the cables and detect when a unidirectional link exists. 

Chapter 15, “Configuring SPAN,”

 describes how to configure Switch Port Analyzer (SPAN), which 

selects network traffic for analysis by a network analyzer such as a SwitchProbe device or other Remote 
Monitoring (RMON) probe. SPAN mirrors traffic received or sent (or both) on a source port, or traffic 
received on one or more source ports or source VLANs, to a destination port.

Chapter 16, “Configuring RMON,”

 describes how to configure remote monitoring (RMON). The 

RMON feature, which is used with the Simple Network Management Protocol (SNMP) agent in the 
switch, means that you can monitor all the traffic flowing among switches on all connected LAN 
segments.

Chapter 17, “Configuring System Message Logging,”

 describes how to configure system message 

logging. It describes the message format, how to change the message display destination device, limit 
the type of messages sent, configure UNIX server syslog daemon and define the UNIX system logging 
facility, and timestamp messages.

Chapter 18, “Configuring SNMP,”

 describes how to configure the Simple Network Management 

Protocol (SNMP). It describes how to configure community strings, enable trap managers and traps, set 
the agent contact and location information, and how to limit TFTP servers used through SNMP.

Chapter 19, “Configuring Network Security with ACLs,”

 describes how to configure network security 

on your switch using two types of access control lists (ACLs), router ACLs and VLAN maps. It describes 
how to apply ACLs to interfaces and provides examples.

Chapter 20, “Configuring QoS,”

 describes how to configure quality of service (QoS) on your switch. 

With this feature, you can provide preferential treatment to certain types traffic. 

Chapter 21, “Configuring EtherChannel,”

 describes how to bundle a set of individual ports into a single 

logical link on Layer 2 and Layer 3 interfaces.

Chapter 22, “Configuring IP Unicast Routing,”

 describes how to configuring IP unicast routing on your 

switch, including configuring IP addressing features, Routing Information Protocol (RIP), Interior 
Gateway Routing Protocol (IGRP), Open Shortest Path First (OSPF) protocol, and Enhanced IGRP 
(EIGRP). To use this feature, you must have the enhanced multilayer software image installed on your 
switch.

Chapter 23, “Configuring HSRP,”

 describes how to use Hot Standby Router Protocol (HSRP) to provide 

routing redundancy for routing IP traffic without depending on the availability of any single router. To 
use this feature, you must have the enhanced multilayer software image installed on your switch.

Chapter 24, “Configuring IP Multicast Routing,”

 how to configuring IP multicast routing. It describes 

how to use and configure the Internet Group Management Protocol (IGMP), Protocol-Independent 
Multicast (PIM) protocol, Cisco Group Management Protocol (CGMP) server functionality, and how to 
inter-operate between PIM and Distance Vector Multicast Routing Protocol (DVMRP) domains. To use 
this feature, you must have the enhanced multilayer software image installed on your switch.

Chapter 25, “Configuring MSDP,”

 describes how to configure the Multicast Source Discovery Protocol 

(MSDP), which is a mechanism to connect multiple PIM sparse-mode domains. To use this feature, you 
must have the enhanced multilayer software image installed on your switch.

Chapter 26, “Configuring Fallback Bridging,”

 describes how to configure fallback bridging on your 

switch. With fallback bridging, you can bridge non-IP protocols between VLAN bridge domains and 
routed ports. To use this feature, you must have the enhanced multilayer software image installed on your 
switch

Chapter 27, “Troubleshooting,”

 describes how to identify and resolve software problems related to the 

IOS software.

Содержание Catalyst 3550































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Catalyst 3550

Samsung 4116 - SCX B/W Laser Manual preview
4116 - SCX B/W Laser
Бренд: Samsung Страницы: 14
Samsung 2252W - Printer - B/W Manual preview
2252W - Printer - B/W
Бренд: Samsung Страницы: 10
Novell ZENworks 7.2 Linux Management Manual preview
ZENworks 7.2 Linux Management
Бренд: Novell Страницы: 10
Alphasmart AS 3000 Installation And User Manual preview
AS 3000
Бренд: Alphasmart Страницы: 4
Arturia JUPITER-8V 2 User Manual preview
JUPITER-8V 2
Бренд: Arturia Страницы: 125
Intergraph InterSite Quick Start Manual preview
InterSite
Бренд: Intergraph Страницы: 46
Nortel Contivity VPN Client User Manual preview
Contivity VPN Client
Бренд: Nortel Страницы: 90
Sanyo VA-SW8000 Instruction Manual preview
VA-SW8000
Бренд: Sanyo Страницы: 132
3Com SUPERSTACK II HUB 10 24-PORT TP User Manual preview
SUPERSTACK II HUB 10 24-PORT TP
Бренд: 3Com Страницы: 8
3Com 3CWXMUPA Release Note preview
3CWXMUPA
Бренд: 3Com Страницы: 8
TC Electronic VSS3 Manual preview
VSS3
Бренд: TC Electronic Страницы: 22
Steinberg TOOLS for CMC Installation Manual preview
TOOLS for CMC
Бренд: Steinberg Страницы: 1
ION MixMeister EZ Setup & Troubleshooting preview
MixMeister EZ
Бренд: ION Страницы: 12
Oracle Application Server 10g Installation Manual preview
Application Server 10g
Бренд: Oracle Страницы: 258
KAPERSKY ANTI-VIRUS - FOR SUN SOLARIS MAIL SERVER User Manual preview
ANTI-VIRUS - FOR SUN SOLARIS MAIL SERVER
Бренд: KAPERSKY Страницы: 254
Tascam CD-R624M Installation Manual preview
CD-R624M
Бренд: Tascam Страницы: 9
Xerox FreeFlow 701P45570 Integration Manual preview
FreeFlow 701P45570
Бренд: Xerox Страницы: 12
Sun Microsystems GlassFish 3 Installation Manual preview
GlassFish 3
Бренд: Sun Microsystems Страницы: 32

Бренды по названию

Популярные бренды

Загрузить еще бренды