manualshive.com logo in svg

Cisco Catalyst 3550, Руководство по настройке программного обеспечения

Функциональный коммутатор Cisco Catalyst 3550 предлагает широкий спектр возможностей для настройки сети. Пользователи могут легко настроить устройство, используя Бесплатное руководство по программному обеспечению, которое можно скачать с manualshive.com. Удобный интерфейс и высокое качество работы делают Catalyst 3550 отличным выбором для вашей сети.

Поделиться
Скачать
background image

 

4-6

Catalyst 3550 Multilayer Switch Software Configuration Guide

78-11194-03

Chapter 4      Assigning the Switch IP Address and Default Gateway

Assigning Switch Information

For the switch to successfully download a configuration file, the TFTP server must contain one or more 
configuration files in its base directory. The files can include these files:

•

The configuration file named in the DHCP reply (the actual switch configuration file).

•

The network-confg or the cisconet.cfg file (known as the default configuration files).

•

The router-confg or the ciscortr.cfg file (These files contain commands common to all switches. 
Normally, if the DHCP and TFTP servers are properly configured, these files are not accessed.)

If you specify the TFTP server name in the DHCP server-lease database, you must also configure the 
TFTP server name-to-IP-address mapping in the DNS-server database.

If the TFTP server to be used is on a different LAN from the switch, or if it is to be accessed by the 
switch through the broadcast address (which occurs if the DHCP server response does not contain all the 
required information described earlier), a relay must be configured to forward the TFTP packets to the 
TFTP server. For more information, see the 

“Configuring the Relay Device” section on page 4-6

. The 

preferred solution is to configure the DHCP server with all the required information.

Configuring the DNS

The DHCP server uses the DNS server to resolve the TFTP server name to an IP address. You must 
configure the TFTP server name-to-IP address map on the DNS server. The TFTP server contains the 
configuration files for the switch. 

You can configure the IP addresses of the DNS servers in the lease database of the DHCP server from 
where the DHCP replies will retrieve them. You can enter up to two DNS server IP addresses in the lease 
database.

The DNS server can be on the same or on a different LAN as the switch. If it is on a different LAN, the 
switch must be able to access it through a router.

Configuring the Relay Device

You must configure a relay device when a switch sends broadcast packets that need to be responded to 
by a host on a different LAN. Examples of broadcast packets that the switch might send are DHCP, DNS, 
and in some cases, TFTP packets. You must configure this relay device to forward received broadcast 
packets on an interface to the destination host. 

If the relay device is a Cisco router, enable IP routing (ip routing global configuration command), and 
configure a helper addresses by using the ip helper-address interface configuration command.

For example, in 

Figure 4-2

, configure the router interfaces as follows:

On interface 10.0.0.2:

router(config-if)# ip helper-address 20.0.0.2

router(config-if)# ip helper-address 20.0.0.3

router(config-if)# ip helper-address 20.0.0.4

On interface 20.0.0.1

router(config-if)# ip helper-address 10.0.0.1

Note

If the Catalyst 3550 multilayer switch is acting as the relay device, configure the interface as a routed 
port. For more information, see the 

“Routed Ports” section on page 8-4

 and the 

“Configuring Layer 

3 Interfaces” section on page 8-22

.

Содержание Catalyst 3550































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Catalyst 3550

M-Audio KEY RIG Quick Start Manual preview
KEY RIG
Бренд: M-Audio Страницы: 4
M-Audio Jamlab Quick Start Manual preview
Jamlab
Бренд: M-Audio Страницы: 4
M-Audio DRUM AND BASS RIG Kurzanleitung preview
DRUM AND BASS RIG
Бренд: M-Audio Страницы: 3
Juniper NETWORK AND SECURITY MANAGER 2010.4 - REV1 Installation Manual preview
NETWORK AND SECURITY MANAGER 2010.4 - REV1
Бренд: Juniper Страницы: 244
Dragon Systems DRAGON NATURALLYSPEAKING ESSENTIALS Quick Start Manual preview
DRAGON NATURALLYSPEAKING ESSENTIALS
Бренд: Dragon Systems Страницы: 26
MACROMEDIA FLASH MX 2004 - FLASH LITE AUTHORING GUIDELINES FOR THE I-MODE... Manuallines preview
FLASH MX 2004 - FLASH LITE AUTHORING GUIDELINES FOR THE I-MODE...
Бренд: MACROMEDIA Страницы: 48
Xerox Phaser 340 Installer Installation preview
Phaser 340 Installer
Бренд: Xerox Страницы: 2
GE eKEY User Manual preview
eKEY
Бренд: GE Страницы: 82
Samsung G2 PORTABLE HX-MU025DC Specifications preview
G2 PORTABLE HX-MU025DC
Бренд: Samsung Страницы: 1
Samsung EasyGSM Owner'S Manual preview
EasyGSM
Бренд: Samsung Страницы: 14
Allied Telesis AT-9400 User Manual preview
AT-9400
Бренд: Allied Telesis Страницы: 668
AVG ANTI-VIRUS 8.5 User Manual preview
ANTI-VIRUS 8.5
Бренд: AVG Страницы: 234
Extron electronics AVT 100 User Manual preview
AVT 100
Бренд: Extron electronics Страницы: 37
A&D Doctor Pro 3 TM-9501 Instruction Manual preview
Doctor Pro 3 TM-9501
Бренд: A&D Страницы: 85
Adaptec DuraStor 6220SS Installation And User Manual preview
DuraStor 6220SS
Бренд: Adaptec Страницы: 133
Adaptec 133U2 User Manual preview
133U2
Бренд: Adaptec Страницы: 174
GRASS VALLEY KAYAK HD-SD Datasheet preview
KAYAK HD-SD
Бренд: GRASS VALLEY Страницы: 8
GRASS VALLEY K2 FCP CONNECT - Release Note preview
K2 FCP CONNECT -
Бренд: GRASS VALLEY Страницы: 19

Бренды по названию

Популярные бренды

Загрузить еще бренды