manualshive.com logo in svg

Cisco 7246 - uBR Router, Руководство по установке оборудования

Cisco 7246 - uBR Router - позволяет эффективно управлять сетями. Подробное описание установки оборудования содержится в Hardware Installation Manual. Бесплатно загружайте руководство с manualshive.com, чтобы узнать, как правильно установить и использовать этот роутер.

Поделиться
Скачать
background image

1-2

Cisco uBR7200 Series Universal Broadband Router Hardware Installation Guide

OL-5421-03

Chapter 1      Cisco uBR7200 Series Overview

  Cisco uBR7200 Series Universal Broadband Router

  •

A Cisco cable clock card that allows you to lock onto and propagate a T1 clock signal throughout 
the router midplane. The cable clock card is used only in the Cisco uBR7246VXR. 

 

See the 

“Cisco Cable Clock Card (Cisco uBR7246VXR Only)” section on page 1-17

.

  •

One network processing engine (NPE) that performs system management functions for the chassis. 
See the 

“Network Processing Engine” section on page 1-13

. 

Table 1-1 on page 1-13

 shows the NPEs 

supported in each universal broadband router chassis. 

  •

An I/O controller shares the system memory functions and the environmental monitoring functions 
with the network processing engine. See the 

“Input/Output Controller” section on page 1-15

.

  •

The Cisco uBR7246 and Cisco uBR7246VXR routers support an optional redundant power supply. 
See the 

“Power Supplies” section on page 1-21

.

  •

A midplane that serves as the interconnect between the cable interface line cards and the other 
components of the system. See the 

“Subchassis and Midplane” section on page 1-26

.

  •

A fan tray, enclosing internal fans that draw cooling air into the chassis to maintain an acceptable 
operating temperature. See the 

“Fan Trays” section on page 1-23

.

The cable interface cards, port adapters, cable clock card, NPE, I/O controller, and power supplies slide 
into their respective chassis slots and connect directly to the routers midplane. There are no internal 
cables to connect. The midplane distributes power from the power supplies to the I/O controller, 
cable interface cards, port adapters, cable clock card, fan tray, and NPE.

Cisco uBR7200 series universal broadband routers may be installed on a tabletop or rack-mounted. A 
rack-mount kit ships with each router. The rack-mount kit includes the hardware needed to mount the 
router in a standard 19-inch equipment rack or telco-type rack. 

The Cisco uBR7200 series universal broadband routers support:

  •

Environmental monitoring and reporting functions to resolve adverse environmental conditions 
before loss of operation.

  •

Online insertion and removal (OIR), allowing key system components to be added or removed 
without powering off the chassis.

Caution

You can remove and replace a cable interface card or port adapter with the same type of component 
without interrupting the rest of the system or having to reconfigure the system. However, to replace a 
cable interface card or port adapter with a different type of card or port adapter, (for example, hot 
swapping from a Cisco MC16B to a Cisco MC16C or replacing a high-speed serial interface [HSSI] 
adapter with an ATM adapter), you must copy your startup configuration to your running configuration 
on the Cisco uBR7200 series routers to enable the interfaces on the new cable interface line card or port 
adapter.

Caution

The I/O controller, NPE, and cable clock card components do not support OIR. You must power down 
the chassis before removing the I/O controller, the NPE, or the cable clock card.

Note

For specific instructions to install, remove, or replace system components, refer to the configuration 
notes that ship with the field-replaceable units or see the documentation at the following URL:

 

 

http://www.cisco.com/univercd/cc/td/doc/product/cable/cab_rout/cfig_nts/index.htm.

Содержание 7246 - uBR Router















































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для 7246 - uBR Router

D-Link NetDefend DFL-260E Reference Manual preview
NetDefend DFL-260E
Бренд: D-Link Страницы: 328
D-Link ShareCenter Pulse DNS-320 Quick Install Manual preview
ShareCenter Pulse DNS-320
Бренд: D-Link Страницы: 2
D-Link DFL-210 - NetDefend - Security Appliance Firewall Registration Manual preview
DFL-210 - NetDefend - Security Appliance
Бренд: D-Link Страницы: 19
D-Link DFL-M510 Faq preview
DFL-M510
Бренд: D-Link Страницы: 22
D-Link DFE-680TX Quick Install Manual preview
DFE-680TX
Бренд: D-Link Страницы: 4
Dahua N300 Quick Start Manual preview
N300
Бренд: Dahua Страницы: 12
D-Link NetDefend DFL-1600 Quick Manual preview
NetDefend DFL-1600
Бренд: D-Link Страницы: 23
Patton electronics SMART NODE 4950-NCE Quick Start Manual preview
SMART NODE 4950-NCE
Бренд: Patton electronics Страницы: 8
Patton electronics NetLink 2960 RAS Datasheet preview
NetLink 2960 RAS
Бренд: Patton electronics Страницы: 2
Patton electronics 3101RC Specifications preview
3101RC
Бренд: Patton electronics Страницы: 2
Grasslin TOWERCHRON DP72 Programming Manual preview
TOWERCHRON DP72
Бренд: Grasslin Страницы: 2
WaiLan DeltaFire 500 User Manual preview
DeltaFire 500
Бренд: WaiLan Страницы: 27
Patton electronics 3087 Quick Start Manual preview
3087
Бренд: Patton electronics Страницы: 12
Thermalright AXP-100H MUSCLE Manual preview
AXP-100H MUSCLE
Бренд: Thermalright Страницы: 36
3Ware 9550SX Series Installation Manual preview
9550SX Series
Бренд: 3Ware Страницы: 4
Ubiquiti AmpliFi AFi-G Quick Start Manual preview
AmpliFi AFi-G
Бренд: Ubiquiti Страницы: 20
AMG Systems AMG9240-C User Manual preview
AMG9240-C
Бренд: AMG Systems Страницы: 2
Roland Super Sound Set SR-JV80-07 Owner'S Manual preview
Super Sound Set SR-JV80-07
Бренд: Roland Страницы: 8

Бренды по названию

Популярные бренды

Загрузить еще бренды