CirPower Hyb 4k-48
SN:800300000
E15311
Made in EU (Spain)
FYYSSXXXXXyyyyy
CIRCUTOR SA - Vial Sant Jordi, s/n
08232 Viladecavalls (Barcelona) Spain 08232
Battery: 38...60V 80A 4000W -20...50ºC - IP55 - Class I
AC Grid: Input 230 V~ 50Hz 17.4 A
4000W (cos
φ=1)/3600W
(cos
φ=0.9)
AC Load: Output 230V ~ 50Hz 17.4A
PF-0.5...0.5 - 4000W(cos
φ=1)/3600W(cosφ=0.9)
PV: 150 ... 700V 20A 4200W
Figure 2:
Specifications plate.
If any problem is noticed upon reception, immediately contact the transport
company and/or
CIRCUTOR
’s after-sales service.
Transport and unload the device following the instructions detailed at point
“1.2.- TRANSPORT
AND HANDLING”
1.2.- TRANSPORT AND HANDLING
Transport, load, unload and handling of the device must be done with care and
caution, using the required manual and mechanical tools to avoid damaging the
device.
If the device is not going to be installed immediately, it must be stored in a solid
plain surface, and follow the storing conditions detailed at point
“1.3.- STOR-
AGE”.
In that case, it is recommended to keep the device inside its protection packaging.
Due to the high weight of the device (
58kg
), the device packaging has two han-
dles to ease its transport
Transport and handling must be done by two persons.
1.3.- STORAGE
Device must be stored following these recommendations:
Avoid storage over irregular surfaces.
Do not store outdoor, in wet zones, or exposed to water.
Avoid hot places.
Avoid corrosive and salty environments.
Avoid keeping the device in dusty, polluted or chemical environments.
8
CirPower Hyb 4k-48
Instruction Manual
