3�- DEVICE INSTALLATION
3.1.- PREVIOUS RECOMMENDATIONS
In order to use the device safely, it is critical that individuals who handle it follow
the safety measures set out in the standards of the country where it is being used,
use the necessary personal protective equipment, and pay attention to the vari-
ous warnings indicated in this instruction manual.
The
CirPower Hyb
device must be installed by authorised and qualified staff.
Before using, wiring or replacing the device, battery DC and AC supply must be switched off.
Handle the device while it is connected to battery, DC and AC supply is dangerous.
It is mandatory to keep the wiring at good conditions, to avoid accidents and damage to persons
or installations.
The manufacturer of the device is not responsible for any damage resulting from failure by the
user or installer to observe the warnings and/or recommendations set out in this manual, nor for
damage resulting from the use of non-original products or accessories or those made by other
manufacturers.
If an anomaly or malfunction is detected in the device, do not use it.
Before doing any maintenance, repair, or modification of any device connection,
it must be unplugged from every power supply.
If you suspect a device malfunction, please, contact the Technical Service.
10
CirPower Hyb 4k-48
Instruction Manual
