These standby modes have the following functions:
Off 1
, prevents unnecessary consumption from the AC network. If no AC network is available,
it prevents the deep discharge of the battery.
Off 2
, prevents the deep discharge of the battery.
Note:
The power supply of the device is forced to switch off and the
only way to wake up
again the
inverter by pressing the
display power switch
.
It is
not possible to connect remotely
to the
device.
7�1�8�1�2� - Night modes
In these modes, the device is shut down during the night period under determined system con-
ditions persisting for more than 10 minutes.
The device will start automatically the next morning.
The purpose of these standby modes is to reduce the AC network consumption or prevent the
deep discharge of the battery.
Note:
During the night the power supply of the device will be switched off and it is
not possible to
connect remotely
to the device.
It will wake up again the following morning. During the night, the device can be switched-on by
pressing the display power switch for 3 seconds. After 10 minutes it will be switched off again.
Night 1
In case there is no AC network available, the device does not have to be left on overnight if the
SOC
of the battery is very low, since any attempt of the battery to supply enough energy to the
AC loads can lead to the deep discharge of the battery.
The power supply will be switched off during the night period if the system conditions are main-
tained for more than 10 minutes.
Night 2
For the
Self-consumption
and
AutoBackup
strategies, the device does not have to be kept
on overnight if the battery’s
SOC
is very low, since the batteries cannot supply enough energy
to cancel direct and/or indirect loads. Therefore, energy does not have to be consumed from
the AC network.
The power supply will be switched off during the night period if the system conditions are main-
tained for more than 10 minutes.
Night 3
In the
Automatic
and
Backup
strategies, the device does not have to be kept on overnight if
there is no AC network available and there are no direct loads connected to the device.
If the system conditions are maintained for more than 10 minutes, the power supply will be
switched off during the night to prevent the deep discharge of the battery.
52
CirPower Hyb 4k-48
Instruction Manual
