9.4.- FACTORY RESET
It is possible to reset the setup to the factory defaults.
To get access, press the key
, for 10 seconds, at the user interface setup screen (
Figure 90
).
Numeric keypad screen (
Figure 83
)
is displayed to insert the password.
Factory reset access password is
897934
.
Several seconds after typing it, the device will reboot, and will show the initial screen
(
Figure 92
).
Figure 92: Initial setup�
To continue working with the
CirPower Hyb,
the device must be configured again.
91
Instruction Manual
CirPower Hyb 4k-48
