CIM MDM 1000, Руководство оператора

Страница: 94 / 100

C-94 METAL DOT MATRIX REV. 04.2002
C LCD EDIT
OPERATORS MANUAL
Step-1: Selecting The Variable Data Field.
Selecting this field as a variable will permit the
operator to enter data to this field when stamping
with the LCD Edit or on line when in a stored
format protcol.
Press V or
ENTER
.
The following options are now available.
A Branch to options for fields if one or more of
the fields options in LCD-14 were selected.
B Branch to storing format, if this was the last
field.
Step-2: Mod Check Field.
A Mod Check Field is a numeric check field in
which the numeric data must satisfy a specfiic
algorithm. This procedure is used to reduce the
chance of wrong entry of numbers in a seies of
numbers that must be correct (Account #, Patient
#, etc.. ). For the algorithm and the series of
numbers satisfying the algorithms refers to the
manual of platic embosser machines
Press M.
NAME: ACCT # TYPE: (V-M-P-C-F) MOD CK
AUTO MOD (Y/N) N REDUNDANCY: N TYPE: 0
Selection of the Auto Mod Check (innactive at
this time)
AUTO MOD-CK (Y/N): N
A 'Y' will enable the on-line Mod Check. This will
allow the on-line transmission of a number
withoutn a check digit and the stamper will
calculate the check digit and enter it to the end
of the transmitted set of numbers.
A 'N' will not enable the on-line Mod Check.
REV. 05-2008