CIM MDM 1000, Руководство оператора

Страница: 53 / 100

A-53
REV. 04.2002 METAL DOT MATRIX
THE MACHINE'S SETUP A
OPERATORS MANUAL
START: Clears any error condition which
may have occurred during the current
operating cycle and do not repeat the
card.
RETRY in case of error if it is pressed the
machine repeat the card.
ENTER
ENTER: Execute the data
F 5
F5: This key selects the operational mode
of the inserting cycle. It is used for tests
and there are 8 choices based on the
combinations of the following 3 modes.
- CONTINUOUS: METAL DOT MATRIX
repeats the last processed card
continuously.
- WITHOUT CARD: METAL DOT MATRIX
runs the operating cycle without
controlling for the presence of a card.
- PAUSE: METAL DOT MATRIX executes
each operation in response to the user
input The key to activate each
movement is START.
1. CONTINOUS
2. WITHOUT CARD
3. WITHOUT CARD & CONTINOUS
4. PAUSE
5. CONTINOUS & PAUSE
6. WITHOUT CARD & PAUSE
7. WITHOUT CARD - CONTINOUS & PAUSE
8. READY
The direction keys
are using to move the cursor in the menu.
REV. 05-2008