CIM MDM 1000, Руководство оператора

Страница: 88 / 100

C-88 METAL DOT MATRIX REV. 04.2002
C LCD EDIT
OPERATORS MANUAL
An open format will have a default format in it.
FM:12 NAME: ABC FM: 13 NAME: WXY
FM:14 NAME: OPEN FM: 15 NAME: OPEN
Select Format 14 by pressing
F 4
,
14
,
ENTER
.
S=SELECT E=EDIT D=DELETE
FORMAT NO:14 FORMAT NAME: OPEN SELECT:S
As shown in Figure, there is a new format in
location 14 named "OPEN". The aim is to program
a new format in this location. Thus an ' E ' must be
entered to change this
"OPEN" format.
Press E (For Editing / New Format).
S=SELECT E=EDIT D=DELETE
FORMAT NO:14 FORMAT NAME: OPEN SELECT:E
Step-4: Naming the new Format
The cursor is at the name location. Type in a new
name, in this case " TEST ".
S=SELECT E=EDIT D=DELETE
FORMAT NO:14 FORMAT NAME: TEST SELECT:E
Step-5: Requesting Format Options
The programmer can now define the various
options required in the format. All the special
options are defaulted to 'N' (NO), so to select
that option the operator must press 'Y' (YES).
Most of the special options pertain to the
individual fields within the format. Therefore they
will appear as each field is programmed. A
example format sheet has been completed to
demonstrate the procedure to be used for
programming. The test format will be
programmed as format 14
Press
ENTER
.
NO. OF DUPS: 00 - INC. CTRS WITH DUP: N
CHANGE COUNTER VALUE: N (Y/N)
Number of duplicate cards desired.
NO. OF DUPS: 000
The value entered in this location will program
the format to duplicate the message by the
number in this location.
000 = 1 original
002 = 1 or 2 copies
999 = 1 or 999 copies
REV. 05-2008