CIM MDM 1000, Руководство оператора

Страница: 93 / 100

C-93
METAL DOT MATRIX REV. 04.2002
LCD EDIT C
OPERATORS MANUAL
Step-5: Enter Maximum Field Length
No. OF CHAR : 31
The programmer can limit the number of
characters that will be accepted by the stamper.
The maximum limit is determined by the value
displayed at the end of the second line of the
LCD.
Type in the desired value and press
ENTER
.
Step-6: Font Type
There are two selectable types of font. The selection
of the type of font is determined by the stamping
wheel configuration. The selections possible for
any stamper are given during the initial installation.
CODE FONT TYPE
0 Normal (Standard Characters )
1 OCR Characters
Enter font type and press
ENTER
.
The following options are now available.
A Branch to the programming of the next field if
this was not the last field to be programmed
and none of the field options in LCD-14 were
selected.
B Branch to options for fields if one or more of
the fields options in LCD-14 were selected.
C Branch to storing format, if this was the last
field.
In the case of the example text card above, the
branch would go to options for fields.
Options for Fields
NAME: DOCTOR TYPE: ( V-M-P-C-F ) VARIABLE
V = Variable Data, M = Mod Check Field, P =
Protected Data,
C = Sequential Counter Field, F = Field Duplicated.
LCD-16 will be displayed if:
A One or more of the Field Options were selected.
B The design data for this field has been
completed.
REV. 05-2008