CIM MDM 1000, Руководство оператора

Страница: 15 / 100

1-15
METAL DOT MATRIX REV. 04.2002
GENERAL INFORMATION 1
OPERATORS MANUAL
1.8 SAFETY INSTRUCTIONS
With "Operator Area" is intended the
area that is accessible, during normal
use, without the use of a tool or that the
means of access is deliberately provided
to the operator. Operator Area is also
the area to which the Operator is instructed to
enter regardless of whether or not tools are
needed to gain access.
The Operator Area of New Metal is compliant
with all the safety requirements of the main
european and extra-european Standards.
However we would recommend to read carefully
the following pages. These instructions recall the
warning symbols used in the Operator Area of
the machine and show any possible dangerous
situation with the precaution that you have to
adopt.
Dangerous mechanical parts (straps,
pulley, gripper to move the card) - Risk
of crushing or entrapment.
Pay attention in introducing hands in
processing card areas. Pay attention to the
entrapment risks for your hair.
The machine is provided of mechanical
protections (enclosures, shields or guards) and
software protection systems to block any moving
part when top cover is open and dangerous part
become accessibles. Nevertheless, in case of
damage of the safety systems, the machine can
run also with the cover opened. In this case
mechanical moving parts represents a possible
danger for the safety of the Operator.
In case of demage of safety systems please,
switch off the machine and call the service.
Warning: the machine may be driven also by
remote control (Personal Computer). Pay
maximum attention during access in dangerous
areas (removal of blocked cards, errors restore or
ordinary maintenance).
In case of necessity a safety mushroom
pushbutton placed on the front panel permits an
immediate arrest of the machine (see 4.1.2. for
details).
High voltage parts - Risk of electric
shock.
No high voltage parts are accessible
into the Operator Area. All the high voltage
circuits are contained into closed areas and are
protected by fixed enclosures. To maximize the
safety, covers and any metal accessible part are
electrically connected to ground. The efficiency
of the connection is tested on every sample by
the internal quality check before putting the
product on the market.
REV. 05-2008