CIM MDM 1000, Руководство оператора

Страница: 91 / 100

C-91
METAL DOT MATRIX REV. 04.2002
LCD EDIT C
OPERATORS MANUAL
Counter Setting ( + / - )
INCR.: Y
The counters can be set to count upward
(increment) or downward (decrement).
INCR.: Y INCR.: N
99 99
100 98
101 97
102 96
Incrementing will be selected for the test example.
Press Y and
ENTER
.
The LCD will now shift to the next counter to be
programmed. It is the same as LCD-9 except it will
display the next counter. Ii the last counter
programmed was counter 4 or if the tab key is
pressed the LCD display will shift to LCD-14.
Y/N MOD: N CTRS: N FLD DUP: N PROTECTED: N
FIELD NUMBER: 26
Step-6:Field Option Selection
The various options required to program the
format are shown in LCD-14. This example format
requires all the options shown above in line 1 of
LCD-14. Enter 'Y' in each of the locations. The 'Y'
will enable the programming of the selected
options in each field. Details for the variable
options are covered in this section.
Press 'Y' for Mod Check
Press 'Y' for CTRS
Press 'Y' for Field Dup
Press 'Y' for Protected Fields
Selecting the number of the fields to be
programmed
Field Number: 26
Enter the number of fields to be programmed into
the format. A maximum of 26 fields can be
entered.
Press
14
and
ENTER
.
NAME: AA Y:028 X:023 COST OF : 07
NO OF CHAR:(MAX. 31) : 31 FONT (0-1) NORMAL
REV. 05-2008