CIM MDM 1000, Руководство оператора

Страница: 84 / 100

C-84 METAL DOT MATRIX REV. 04.2002
C LCD EDIT
OPERATORS MANUAL
TOP
LEFT
BOTTOM
END
Y = 52M OR 2.04
CR80 / 70
X = 40M OR 1.56
CR50
Y = 7.0 M ( MIN )
0.28 “
CR80 = 79M / 3.1 “
CR70 = 60M / 2.4 “
CR50 = 70M / 3.1 “
X = 5.8M (MIN)
0.23 “
Fig. C.1
Card Stamping Area.
The card can be laid out in inches or metric
measurements. The operator can select the
measurements to be used.
The card Card Stamping Area and stamping
specifications are as follows:
A The standard space between each standard
line is 0.16 inches (40 mm).
B The space to an OCR line (top and bottom) is
0.24 inches (6.0 mm).
C The standard character space is 0.10 inches
(2.5 mm)
The "Cost of 07" produces embossing of 10
characters per inch.
D The OCR character spacing is 0.142 inches
(3.6 mm)
The "Cost of 10" produces embossing of 7
characters per inch.
NOTE: The character spaceing is acheived by
the number of motor steps used to move the
card from one character to the adjacent
character.
Motor Steps are shown as "Cost".
The " Cost of 07 " produces a standard character
space. (10 cpi).
The " Cost of 10 " produces an OCR character
space. (7 cpi).
Each motor step (cost of 01) is transalated to
a distance of 0.36 mm ( 0.0142 ")
REV. 05-2008