CIM MDM 1000, Руководство оператора

Страница: 90 / 100

C-90 METAL DOT MATRIX REV. 04.2002
C LCD EDIT
OPERATORS MANUAL
Set Incremental Counters
CHANGE COUNTER VALUE: N (Y/N)
There are four counters which can be
programmed into each format. An 'N' will
advance the programming to screen LCD-14. All
counters remain as previously set. A 'Y' permits
changes to the counter values and other counter
parameters.
Press
ENTER
to go Step-6: Field Option Selection.
Press Y to program the incremental counters.
CT-1 (10 MAX) : 0
SEQ.STEP:1
INCR.: Y
Set Incremental Counter No: 1
CT-1 ( 10 MAX ) : 0
The number displayed will be the counter value
embossed on the next card.
Enter the new counter starting value which is
shown in field 3 of the specification sheet on
page 11 of this section.
Type in 00002 and press
ENTER
.
CT-1 (10 MAX) : 00002
SEQ.STEP:1
INCR.: Y
Select the stepping value of the counter
SEQ.STEP: 1
The programmer can select the step value of the
sequential counter. The counter can be
programmed to step sequentially in increments
of 1 to 9.
Steps of 1 = 1-2-3-4-5-6-7-8-9
Steps of 2 = 2-4-6-8-10-12-14-16
Steps of 3 = 3-6-9-12-15-18-21-24
Steps of 4 = 4-8-12-16-20-24-28-32
Steps of 9 = 9-18-27-36-45-54-63-72-81
The step value of 1 will be used in the test
example.
Press
1
and
ENTER
.
CT-1 ( 10 MAX ) : 00002 JUST.: (R/L) R
MSD = 0 : Y SEQ.STEP: 1 INCR.: Y
REV. 05-2008