CIM MDM 1000, Руководство оператора

Страница: 78 / 100

C-78 METAL DOT MATRIX REV. 04.2002
C LCD EDIT
OPERATORS MANUAL
C.1 LCD EDIT AVAILABILITY
Stampers equipped with an external keyboard
have an off-line stamping capaiblity ('LCD Edit')
i.e. the stamping data is entered from that
keyboard and does not come from a connected
computer. The operator may create and store
formats and enter card data using the keyboard.
The formatting procedure is discussed in Section
2.
The LCD edit ( off-line ) mode does not depend
on a Host Computer connection.
A format must be created and stored before
data entry is possible. See Section 2 on LCD edit
format creation and storage. All formats can be
given a name of up to 8 characters in length. The
first format ( primary format ) '01' is a default
format. This format will be selected automatically
when the LCD edit function is requested for the
first time after switching on by pressing the
F 7
key. Any format can be selected by using the
F 4
key followed by the format #, followed by
the Enter key two times.
C.2 ENABLING THE OFF-LINE MODE
An stamper, which is ready for off-line data, will
show the folllowing message on the LCD display:
V X.XX
READY
To enable the off-line option, press
F 7
.
The LCD messages will be displayed:
Data can be entered to the first field of the format
01.
Detailed information is given on Page 4,
Reference: Stamp Data Entry.
FORMAT: 01 NAME: ADMIT F7 TO ON-LINE
ACCT #:
REV. 05-2008