CIM MDM 1000, Руководство оператора

Страница: 30 / 100

4-30 METAL DOT MATRIX REV. 04.2002
4 OVERALL DESCRIPTION
OPERATORS MANUAL
Fig. 4.3
Fig. 4.4
Fig. 4.5
da fare
4.2 DIFFERENCES BETWEEN MANUAL (1000) AND
AUTOMATIC (2000) MODELS
The METAL DOT MATRIX 2000 has a loader unit
(right to the stamper unit) that contains up to 200
metal plates, and an unloader magazine (on the
left) to deposit the personalized plates (fig. 4.3).
Two alarms are provided in case of LOADER
EMPTY or UNLOADER FULL.
The MDM1000 version doesn't have magazine of
metal plates (see fig. 4.4), so it can personalize
only 1 plate at time.
On the left enclosure side there is an opening that
will permit to insert and remove the plate (fig.
4.5).
Use this opening to put a new plate and to
remove it when the cicle of personalization is
finish. Remove the old plate before to start a new
cicle.
A photocell will stop the unloading movements
each time you put your hand in the hole.
REV. 05-2008